-
#include "stm32f10x.h"
//#include "stm32f10x_lib.h"
void Delay(unsigned int x);
void UART_Init(void);
int main(void)
{
while (1)
{
Delay(300000);
...[Details]
-
W
LED
is popular.
PWM
and analog dimming
drivers
will excel in different fields
for different application requirements
. In view of this, the industry has developed s...[Details]
-
We have analyzed the BOM of ZTE Axon 20 5G, and this time we will analyze the number of components and their cost. Before we start the analysis, we need to explain some concepts and issues of compo...[Details]
-
The basic structure of the 8051 series MCU includes: 32 I/O ports (4 groups of 8-bit ports); two 16-bit timer counters; full-duplex serial communication; 6 interrupt sources (2 external interrupts, 2...[Details]
-
The cut-off and saturation characteristics of the triode can also be used to form a limiting circuit (as shown in Figure T1614). This type of circuit also has an amplification function. In order to...[Details]
-
TrendForce research shows that the DRAM industry revenue in the fourth quarter of 2022 was US$12.28 billion, down 32.5% from the previous quarter. The decline even exceeded the 28.9% decline in the ...[Details]
-
Hello everyone, every time you use an oscilloscope to measure a signal, do you directly pick up the probe to measure the channel signal? Have you performed channel delay correction? In fact, delay co...[Details]
-
Although this article was written 10 years ago, it still has a lot of practical reference significance. In addition, other IC manufacturers also have a lot of reference documents, if you are intere...[Details]
-
A silicon crystal plate with a strong light installed on it, once it sees the sun, the strong light lights up as if it is connected to a power source. This is what the reporter saw yesterday at the ho...[Details]
-
1. Basic knowledge of hardware testing 1.1 What is hardware testing? Definition: Hardware testing is a process activity to check the product hardware (structure, PCBA, key components, etc.) during th...[Details]
-
On September 1, when RT-Thread founder Xiong Puxiang announced that the latest microkernel operating system RT-Thread Smart would still be open source, there was warm applause at the press conference...[Details]
-
When debugging a problematic circuit and want to see the waveform, the circuit is normal when the probe is connected, but the problem occurs again when the probe is removed. This is caused by the ...[Details]
-
#include GPIO_TypeDef* io_led=GPIOC; const u16 pin_led=GPIO_Pin_1; static __IO uint32_t TimingDelay; void Led_Init() { GPIO_InitTypeDef GPIO_init_l; RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GP...[Details]
-
How to pause a GRAPH block
Description: When the Graph program is running, in some cases, the Sequence needs to be paused to solve the problem. When the problem is solved, the Graph program ne...[Details]
-
Setting the origin position signal for the ABB robot is an important step, which can help the robot accurately locate and perform tasks.
Understand the importance of the origin position s...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD