Y47284K27000T9L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y47284K27000T9L

Y47284K27000T9L: DescriptionFixed Resistor, Metal Foil, 1.5W, 4270ohm, 500V, 0.01% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Y47284K27000T9L Overview

Fixed Resistor, Metal Foil, 1.5W, 4270ohm, 500V, 0.01% +/-Tol, -.2,.2ppm/Cel,

Y47284K27000T9L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	853509863
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	4270 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.01%
Operating Voltage	500 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

AD524 gain 200 amplifier

Improved servo power supply circuit diagram

Power supply circuit diagram composed of M5237L

IC-1431 silicon piezoresistive pressure sensor classic circuit

Dual output regulated power supply circuit diagram

Pyroelectric infrared alarm circuit

LCD Operation (S3C2440): Let's first briefly introduce the operating principle of LCD. As shown in the LCD schematic diagram below, each dot in it is a pixel. Imagine there is an electron gun that emits light of various color...; 灞波儿奔 Microcontroller MCU

The operational amplifier forms a three-point capacitor oscillation: A schematic diagram found on the Internet. Now replace the L in the diagram with a passive crystal oscillator, as shown belowCan this achieve oscillation? Does oscillation require R1 to be much larger...; S3S4S5S6 Analog electronics

[NXP Rapid IoT Review] First give SLN-RPK-NODE an emulator: It's not fun if you can't debug. I can't afford an expansion dock, so I soldered two DF12 (4.0) male connectors to an emulator and tried it. I searched many stores and finally found one that was reaso...; littleshrimp RF/Wirelessly

Guangdong companies are looking for electronic engineers/structural engineers/acoustic engineers: Company Name: Dongguan Liesheng Electronic Technology Co., Ltd. (mainly engaged in Bluetooth headsets, TWS headsets, Bluetooth speakers, watches, etc.) Recruitment positions: Electronic Engineer, Stru...; rain96 Recruitment

Can the output voltage of an LDO be equal to the input voltage?: For a 5V output LDO, such as TPS73501, if the input is 5V, will the output be 5V? If the input is less than 5V, such as 4.7V, will the output still be a stable 5V? I know this design is not acceptable...; sfcsdc Analog electronics

After importing the 2812 project example, it prompts that it does not match and cannot be run: #16019-D file "C:/ti/ccsv6/tools/compiler/c2000_6.2.5/lib/rts2800.lib" specifies large memory model, which is not compatible with small memory model specified in a previous file or on the command line...; 哈哈爱学习 DSP and ARM Processors

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components