-
Electrolyte analyzers can measure the potassium (K), sodium (Na), chloride (C1), calcium (Ca), pH value, etc. in biological specimens such as serum, plasma, whole blood, and diluted urine, and provid...[Details]
-
The oscilloscope is a commonly used electronic measuring instrument, which is widely used in many industries. There are two key points we need to pay attention to when using the oscilloscope. The firs...[Details]
-
1. Function prototype: void Jump_Address(void) { if (((*(volatile u32*)ApplicationAddress) & 0x2FFE0000 ) == 0x20000000) { test = (*(volatile u32*)ApplicationAddress); JumpAddress = *(volatile u32*) ...[Details]
-
As one of the most commonly used measuring instruments in the electronics industry, the oscilloscope involves a large amount of image import and export, data processing, automated operations, etc. We...[Details]
-
Introduction to automatic glue dosing machine: SCA dosing machine can be regarded as a simplified version of Durr glue. The principle is the same, but the technology is more complicated. SCA fault ...[Details]
-
From analog monitoring to digital monitoring, from standard definition to high definition, etc., these all represent the transformation and change of the importance of security. The current video ...[Details]
-
In the oil refining and chemical production process, V-cone flowmeter is one of the most used field instruments. Magnetic float level gauges are widely used in oil refining and chemical equipment d...[Details]
-
The positive and negative polarity of the chip diode (1N4148WST4) are distinguished. If they are connected randomly in the circuit, it may not work properly at best, or even be damaged. The fo...[Details]
-
Why does Class A amplifier sound better than Class B amplifier?
In static state, Class A and Class B amplifiers are connected to pure resistance loads. When tested, the indicators may be...[Details]
-
In a switched mode power supply (SMPS), the AC mains input is directly regulated and filtered to obtain a DC voltage. The DC voltage is then converted at a high frequency (typically between 10 kHz an...[Details]
-
SPI is a full-duplex, high-speed, synchronous communication bus. It has two working modes: master mode and slave mode. In master mode, the transmission rate can reach 3mbps. When the system clock is ...[Details]
-
Abstract: In order to realize the miniaturization of medical equipment and the wirelessization of medical monitoring , a medical monitoring system based on ZigBee wearable sensors is designed, w...[Details]
-
In some electrostatic sensitive areas, such as electronic component manufacturing, assembly areas, super quiet rooms, computers, pharmaceutical and RD tests, operating rooms, medical equipment manufa...[Details]
-
The TPS759XX series is an LDO linear regulator designed by TI for powering multi-chip systems such as DSP, ASIC and FPGA. Figure 1 is a simplified schematic diagram of the circuit. The TPS759XX h...[Details]
-
question
If a DC-DC device has two outputs but is used as a single two-phase output, how does this affect the soft-start timing?
answer
...[Details]