XW2Z
XW2Z
Dimensions
Unit: mm (inch)
3
XW2Z-PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE)
The G79-PC Cable with a connector for the G7TC cannot be
used for the XW2C due to a difference in wiring. The G79-PC
Cable can be used for some of the XW2B Screw Terminal
Blocks, refer to the XW2B data sheet.
Cable length L
Wiring Diagram
FCN-367J024-AU/F
(mated side)
XG4M-2030
(mated side)
Part number
XW2Z-050A
XW2Z-100A
XW2Z-150A
XW2Z-200A
XW2Z-300A
XW2Z-500A
Cable length L
0.5 m (1.64 ft)
1 m (3.28 ft)
1.5 m (4.92 ft)
2 m (6.56 ft)
3 m (9.84 ft)
5 m (16.40 ft)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
C200H-ID215
C200H-OD215
C200H-MD215
C200H-MD115
C200H-MD501
C200H-ID501
C200H-OD501
C500-ID218CN
C500-ID501CN
C500-OD415CN
C500-MD211CN
C500-OD501CN
C200H-ID215
C200H-ID501
C500-ID218CN
C500-ID501CN
C200H-MD215
C200H-MD115
C200H-MD501
C500--MD211CN
I/O points
32 points input
32 points output
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
32 points input
32 points output
32 points input
32 points input
32 points output
16 points in/16 points out
32 points output
32 points input
32 points input
32 points input
32 points input
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
Terminal block
XW2B-20G5
XW2B-20G4
XW2B-40G5-T
XW2B-20G5-D
Dedicated cable
XW2Z-PPPA
XW2C-20G5-IN16
(See Note 3)
Note: 1. The G79-P Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC
Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet.
2. The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated
cables.
3. The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output
signals (modules with “MD” in the part number), only the input portion of the PLC module can be used.
3
XW2Z
Unit: mm (inch)
XW2Z
3
XW2Z-PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Wiring Diagram
Cable length L
FCN-367J040-AU/F
(mated side)
XG4M-4030
(mated side)
Part number
XW2Z-050B
XW2Z-100B
XW2Z-150B
XW2Z-200B
XW2Z-300B
XW2Z-500B
Cable length L
0.5 m (1.64 ft)
1 m (3.28 ft)
1.5 m (4.92 ft)
2 m (6.56 ft)
3 m (9.84 ft)
5 m (16.40 ft)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
CQM1-ID213
CQM1-OD213
C200H-ID216
C200H-OD218
C200H-OD21B
C200H-ID111
C200H-ID217
C200H-OD219
C500-ID114
3G2A5-ID219
3G2A5-OD213
I/O points
32 points
Terminal block
XW2B-40G5
XW2B-40G4
Dedicated cable
XW2Z-PPPB
64 points
Note: 32-point I/O modules use one Terminal Block and one dedicated cable.
64-point I/O modules use two Terminal Blocks and two dedicated cables.
4
XW2Z
XW2Z
3
XW2Z-PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Part number
XW2Z-100D
XW2Z-150D
XW2Z-200D
XW2Z-P00D
XW2Z-300D
XW2Z-500D
Cable length for A and B
B
250 (9.84)
Yellow
Cable length A
1 m (3.28 ft)
1.5 m (4.92 ft)
2 m (6.56 ft)
3 m (9.84 ft)
5 m (16.40 ft)
Cable length B
0.75 m (2.46 ft)
1.25 m (4.10 ft)
1.75 m (5.74 ft)
2.75 m (9.02 ft)
4.75 m (15.58 ft)
Note: 1. CN2 (black cable side) is wired to line A of CN1 and
CN3 (yellow cable side) is wired to line B of CN1.
2. The G79-PC Cable for the G7TC Terminal Block can-
not be used for the XW2C due to a difference in wiring.
Black
Line Line
A
B
A
500 (19.68)
Wiring Diagram
FCN-367J024-AU/F
CN1 (mated side)
XG4M-2030
CN3 (mated side)
XG4M-2030
CN2 (mated side)
Triangle mark
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
CQM1-ID213
C200H-ID216
C200H-ID217
C500-ID114
3G2A5-ID219
I/O points
32 points
64 points
Terminal block
Two XW2C-20GS-IN16 input blocks
Four XW2C-20GS-IN16 input blocks
Dedicated cable
One XW2Z-PPPD cable
Two XW2Z-PPPD cables
5