Adjusting screw
Description
the Desco model
09867
industrial grade snap Attaching
tool is designed to install rivet style 10mm (3/8”) snap
sockets or studs onto mat materials. It is easy to use
and only takes seconds. the tool is ideal for multiple
snap installations. Due to its vise grip design it is not
necessary to make a hole in the mat before installing
snaps.
Adjusting screw
Installation
1. Install proper anvil on snap Attaching tool (see
illustration).
Anvil
2. Place rivet on rubber base of tool. Make sure it is
secure.
3. Place stud or socket onto the anvil.
4. squeeze handle tightly to install snap.
5. Adjust anvil travel to properly secure snap assembly:
clockwise to tighten, and counter-clockwise to open
jaws for thicker mats.
Installing a
socket on mat
Anvil
Specifications
Height:
Width:
Weight:
ITEM
12”
5 3/8”
1.70 lb.
DESCRIPTION
snap Attaching tool
studs and rivets, 100 per pack
sockets and rivets, 100 per pack
Installing a
stud on mat
tool includes two anvils, one for sockets, one for studs.
09867
09856
09857
Specifications and procedures subject to change without notice.
SNAP ATTACHING TOOL, 10MM (3/8”)
DESCO WEST:
3651 WALnut AVe., cHIno, cA 91710 WeB sIte:
Desco.com
PHone (909) 627-8178 FAX (909) 627-7449 FAX reQuest (909) 627-7126
DESCO EAST:
one coLGAte WAY, cAnton, MA 02021-1407
PHone (781) 821-8370 FAX (781) 575-0172
© 2010 Desco InDustrIes Inc.
employee owned
DRAWING
NUMBER
09867
DATE:
February
2010