TSP
www.vishay.com
Vishay Dale Thin Film
Molded, Commercial, Single In-Line Thin Film Resistor,
Through Hole Network (Standard)
FEATURES
• Lead (Pb)-free gold plated terminals standard
• Gold to gold terminations (no internal solder)
Actual Size
Designed to meet MIL-PRF-83401 characteristic “V” and “H”
Available
• Exceptional ratio stability over time and
temperature (R ± 0.015 % 2000 h at 70 °C)
• Rugged low profile molded case 6 pins, 8 pins,
and 10 pins available
• Compatible with automatic insertion equipment
Available
These resistor networks are available in 6 pins, 8 pins and
10 pins styles in both standard and custom circuits. They
incorporate Vishay Dale Thin Film’s patented passivated
nichrome film to give superior performance on temperature
coefficient of resistance, thermal stability, noise, voltage
coefficient, power handling and resistance stability. The
leads are attached to the metallized alumina substrates by
Thermo-Compression bonding. The body is molded
thermoset plastic with gold plated copper alloy leads. This
product will outperform all of the requirements of
characteristic “V” and “H” of MIL-PRF-83401.
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
25
ABSOLUTE
0.1
TRACKING
2
RATIO
0.05
SCHEMATIC
Schematic 01
Schematic 03
Schematic 06
1
2
3
4
N
1
2 3
4
N-1
N
1
2
3
4
N
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
6, 8, 10
100
to 200 k per resistor
± 25 ppm/°C (standard)
± 2 ppm/°C (typical less 1 ppm/°C equal values)
(1)
± 0.1 % to ± 1.0 %
± 0.05 % to ± 0.1 % to R
1
0.100 W (per element typical at + 25 °C)
0.500 W
R
± 0.05 %
R
± 0.015 %
< 0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 125 °C
< - 30 dB
< 0.08 μV/°C
R
± 0.01 %
R
± 0.002 %
CONDITIONS
-
-
-
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
-
-
-
-
-
-
1 year at + 25 °C
1 year at + 25 °C
Note
(1)
Consult factory for TCR tracking specifications 01 schematic
Revision: 21-Oct-13
Document Number: 60037
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
TSP
www.vishay.com
Vishay Dale Thin Film
DIMENSION
A
B
C
D
E
F
G
H
L (6 Pins)
L (8 Pins)
L (10 Pins)
INCHES
0.035
0.040
0.100 ± 0.005 non-accum.
0.019 ± 0.006 typical
0.187 ± 0.010
0.135
0.095
0.012 ± 0.004
0.583 ± 0.015
0.783 ± 0.015
0.983 ± 0.015
MILLIMETERS
0.89
1.02
2.54 ± 0.13
0.48 ± 0.15
4.75 ± 0.25
3.43
2.41
0.31 ± 0.10
14.81 ± 0.38
19.89 ± 0.38
24.97 ± 0.38
DIMENSIONS AND IMPRINTING
in inches and millimeters
Part
Number
Indicates
Pin 1
Date
Code
Vishay
Logo
A
F
B
H
C
D
L
G
E
CONSTRUCTION
High Purity
Alumina Substrate
Sputtered TAMELOX
Film System
Gold Plated
Copper Leads
Gold to Gold
Thermo-Compression Bond
(No Internal Solder)
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body Molded
Terminals
Plating
Model TSP - Lead (Pb)-free Standard
Model TSPS - Lead (Pb)-free Solder Coated Option
Model TSPL - Tin/Lead Solder Coated Option
Tin/Lead and Lead (Pb)-free Finish
Passivated nichrome or tantalum nitride
Alumina
Epoxy
Copper alloy
Nickel/gold
Gold plated
Sn96.5, Ag3.0, Cu0.5
Sn63
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TSP6011002BUF
T
T
S
S
P
P
S
1
6
0
0
0
1
1
1
1
0
0
0
0
2
2
B
C
U
U
F
F
GLOBAL MODEL PIN COUNT
(3 or 4 digits)
(1 or 2 digits)
TSP
(Lead (Pb)-free)
(e4)
TSPL
(Tin/lead)
TSPS
(Lead (Pb)-free)
(e1)
(1)
SCHEMATICS
01
(1)
= 5, 7 or 9
resistors with
Pin 1 common
03
= 3, 4 or 5
isolated resistors
06
= 5, 7 or 9
series connected
TCR
CHARACTERISTICS
R
= ± 25 ppm/°C
(2)
H
= ± 50 ppm/°C
K
= ± 100 ppm/°C
(2)
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies the
number of zeroes
to follow.
e.g.: 1001 = 1K
1002 = 10K
TOLERANCE AND
RATIO TOLERANCE
Absolute
A
= 0.1 %
(3)
B
= 0.1 %
C
= 0.25 %
D
= 0.5 %
F
= 1.0 %
Ratio
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
PACKAGING
UF
= Tubed
6
8
10
Note
01
Schematic
greater than
250
only
Note
Consult factory for TCR tracking specifications 01 schematic
Note
(3)
Tol. available on 1K and up only. R is reference resistor.
1
R
TCR
CHARACTERISTIC
1001
RESISTANCE
F
TOLERANCE AND
RATIO TOLERANCE
Historical Part Number example: TSP803R1001F (for reference purposes only)
TSP
SERIES
8
PINS
03
SCHEMATIC
Revision: 21-Oct-13
Document Number: 60037
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
TSP
www.vishay.com
Vishay Dale Thin Film
DERATING CURVE
100
Percent of Rated Power
80
60
40
20
0
0
25
70
Ambient Temperature °C
50
100
125
Revision: 21-Oct-13
Document Number: 60037
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Sensor
京公网安备 11010802033920号
EEWORLD
