Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 1.1 (06-05-07)
2
SMSC SCH311X
PRODUCT PREVIEW
LPC IO with 8042 KBC, Reset Generation, HWM and Multiple Serial Ports
General Description
The SCH3112/SCH3114/SCH3116 Product Family is a 3.3V (Super I/O Block is 5V tolerant)
PC99/PC2001 compliant Super I/O controller with an LPC interface. The SCH3112/SCH3114/SCH3116
Product Family also includes Hardware Monitoring capabilities, enhanced Security features, Power
Control logic and Motherboard Glue logic.
The SCH3112/SCH3114/SCH3116 Product Family's hardware monitoring capability includes
temperature, voltage and fan speed monitoring. It has the ability to alert the system of out-of-limit
conditions and automatically control the speeds of multiple fans. There are four analog inputs for
monitoring external voltages of +5V, +2.5V, +12V and Vccp (core processor voltage), as well as internal
monitoring of the SIO's VCC, VTR, and Vbat power supplies. The SCH3112/SCH3114/SCH3116 Product
Family includes support for monitoring two external temperatures via thermal diode inputs and an
internal sensor for measuring ambient temperature. The nHWM_INT pin is implemented to indicate out-
of-limit temperature, voltage, and FANTACH conditions. The hardware monitoring block of the
SCH3112/SCH3114/SCH3116 Product Family is accessible via the LPC bus. The same interrupt event
reported on the nHWM_INT pin also creates PME wakeup events. A separate THERMTRIP output is
available, which generates a pulse output on a programmed over temperature condition. This can be
used to generate an reset or shutdown indicator to the system.
The hardware monitoring capability also has programmable automatic FAN control. Three fan
tachometer inputs and three pulse width modulator (PWM) outputs are available.
The Motherboard Glue logic includes various power management and system logic including generation
of nRSMRST, a programmable Clock output, and reset generation. The reset generation includes a
watchdog timer which can be used to generate a reset pulse. The width of this pulse is selectable via
an external strapping option.
The SCH3112/SCH3114/SCH3116 Product Family incorporates complete legacy Super I/O functionality
including an 8042 based keyboard and mouse controller, an IEEE 1284, EPP, and ECP compatible
parallel port, multiple serial ports, one IrDA 1.0 infrared ports, and a floppy disk controller with SMSC's
true CMOS 765B core and enhanced digital data separator, The true CMOS 765B core provides 100%
compatibility with IBM PC/XT and PC/AT architectures and is software and register compatible with
SMSC's proprietary 82077AA core. System related functionality, which offers flexibility to the system
designer, General Purpose I/O control functions, and control of two LED's.
The serial ports are fully functional NS16550 compatible UARTs that support data rates up to 1.5 Mbps.
There are four, 8 pin Serial Ports and two, 4pin Serial Ports. The reduced pin serial ports have selectable
input and output controls. The Serial Ports contain programmable direction control, which will
automatically Drive nRTS when the Output Buffer is loaded, then Drive nRTS when the Output Buffer
is Empty.
The SCH3112/SCH3114/SCH3116 Product Family is ACPI 1.0/2.0 compatible and therefore supports
multiple low power-down modes. It incorporates sophisticated power control circuitry (PCC), which
includes support for keyboard.
The SCH3112/SCH3114/SCH3116 Product Family supports the ISA Plug-and-Play Standard register set
(Version 1.0a). The I/O Address, DMA Channel and hardware IRQ of each logical device in the
SCH3112/SCH3114/SCH3116 Product Family may be reprogrammed through the internal configuration
registers. There are up to 480 (960 - Parallel Port) I/O address location options, a Serialized IRQ
interface, and Three DMA channels.
SMSC SCH311X
3
Revision 1.1 (06-05-07)
PRODUCT PREVIEW
LPC IO with 8042 KBC, Reset Generation, HWM and Multiple Serial Ports
Table 1 Device Specific Summary
FUNCTION
LPC Bus Interface
Legacy functional
Blocks
(
1.
)
Floppy on Parallel
Port Option
Reset Generator
Serial Ports
Programmable
Clock Output
IDE / PCI Reset
Outputs
Power Button / AC
Fail Support
GPIOs
GPIO with VID
Compatible Inputs
Dedicated GPIOs
Hardware Monitor
SCH3112
YES
YES
SCH3114
YES
YES
SCH3116
YES
YES
YES
YES
YES
YES
2
YES
YES
4
YES
YES
6
(
2.
)
YES
YES
YES
NO
YES
YES
NO
40
6
40
6
40
6
16
YES
0
YES
0
YES
1. Legacy Blocks include floppy disk, parallel port, watchdog timer and keyboard controller
2. 2 of the 6 serial ports have 4 pin interfaces
Revision 1.1 (06-05-07)
4
SMSC SCH311X
PRODUCT PREVIEW
LPC IO with 8042 KBC, Reset Generation, HWM and Multiple Serial Ports
A chip technology company in Beijing is recruiting ( chip design engineer) [full-time or part-time]Job description:1. Responsible for the design of RF, microwave, and millimeter wave integrated circui...
Author: Ah HuatianIntroduction
NUC980 is equipped with an external bus interface (EBI) for external devices. EBI supports independent mode and multiplexed mode for address bus and data bus. The addres...
Finally, I am learning to use the MAIX BIT development board, the main control is k210, I need to get the image from the camera, convert it into a JPEG data stream, and send it to the serial screen vi...
As a basic component of a computer, the mouse plays an important role. With the advancement of technology and market demand, the mouse is also experiencing rapid development. Traditional mice, whether...
PI's self-developed gallium nitride helps realize smaller, lighter and more efficient chargers. Watch the video and get a gift! The event has started~Click here to enter the eventPowiGaN Technology
Po...
My project requires ADC multi-channel data acquisition. RSL10 comes with an ADC peripheral. After checking the data sheet, I found that this ADC is not bad, with 14-bit resolution and sufficient accur...
dql2016onsemi and Avnet IoT Innovation Design Competition
As the requirements for finished LED lamps gradually increase, LED light guide plates and diffusers have become popular due to their high light transmittance and fresh market selling points compare...[Details]
The ADP1053, based on a voltage mode PWM architecture, is a flexible, application dedicated digital controller designed for isolated and nonisolated dc-to-dc power supply applications. The ADP1053 ...[Details]
At present, the Shanghai Stock Exchange has officially accepted the IPO application of Loongson Technology Co., Ltd. ("Loongson" for short) on the Science and Technology Innovation Board. At the s...[Details]
l Introduction
Compared with traditional analog oscilloscopes, digital storage oscilloscopes not only have the advantages of waveform storage, small size, low power consumption, and easy u...[Details]
In order to accelerate the development of new products, reduce development costs, and improve product competitiveness, domestic automobile companies have begun to use benchmarking technology as the...[Details]
The schematic diagram of the simple automatic charging device is shown in Figure 1. GB is the battery to be charged. When it is not used, the charger plugs X1 and X2 are inserted into the charging soc...[Details]
With the wide variety of UPS in the current market and the diversity of working modes, requirements have been put forward on how to select and configure an ideal UPS. Here we briefly discuss the de...[Details]
SP800 Series Network Analyzer The SP800 series network analyzers are mainly designed for general microwave network testing and large-scale production applications, while the SP800P series is the high...[Details]
The latest data released by the Power Battery Alliance shows that in the first half of this year, the cumulative installed capacity of power batteries in China was 110.1GWh, a year-on-year increas...[Details]
With the continuous acceleration of the All IP process,
the new generation of optical transmission technology represented by
OTN
and
PTN
is replacing the status of DWDM and MSTP, and...[Details]
In view of the many problems that the reconnaissance and shooting command teams of our army currently face during field training, such as time-consuming and laborious target setting and display, ...[Details]
The core of the linear regulator is to use a power transistor or MOSFET working in the linear region as a dynamically adjustable resistor to control the load. There are two types of linear regulators:...[Details]
The differential amplification principle of the high-voltage differential probe is that a pair of signals are simultaneously input into the amplifier circuit, and then subtracted to obtain the origin...[Details]
Modern vacuum tubes are composed of four basic components: the filament (for heating), cathode, grid and anode. When the filament is connected to a voltage, the cathode is heated, and the cathode e...[Details]
International New Energy Network: PV inverter leader SMA Solar Technology said recently that it will not achieve its full-year revenue target due to pricing pressure and further unexpected weakness...[Details]
Recruitment
京公网安备 11010802033920号
EEWORLD
