-
AbstractThe photoelectric incremental encoder, also known as the photoelectric angular position sensor, is a core component used to measure the motor speed and rotor position in the electrical tran...[Details]
-
The tuning fork level switch is a liquid level measurement control switch designed based on the design principle of detecting the change in vibration frequency when the fork is immersed in the medium...[Details]
-
According to reports from the Nikkan Kogyo Shimbun and the Sankei Shimbun, the Japan Robot Association officially announced the 2019 Japanese robot statistics (the statistics include members and non-...[Details]
-
The STM8S003F3P6 microcontroller has three timers: Timer 1, Timer 2, and Timer 4. Timer 1 is a 16-bit advanced timer, Timer 2 is a 16-bit general-purpose timer, and Timer 4 is an 8-bit basic timer. T...[Details]
-
introduction DeviceNet is an open fieldbus communication network based on CAN bus technology that complies with global industrial standards. It is used for control, configuration and data acq...[Details]
-
LABVIEW provides several timers (including DELAY), as shown in the figure below.
First, look at the help description of the Tick Count node:
Returns the value of the millisecond timer.
Th...[Details]
-
LEDs have been used in electronic systems for many years, primarily as indicator lights for electronic devices. Driving
LED Lighting
The key driver of the market is the emergence of hig...[Details]
-
Without further ado, let’s talk about the purpose: using the timer query method to invert the LED. Then add the code: ORG 0000H MOVTMOD,#00H MOV TH1,#0ECH MOV TL1,#78H SETB TR1 WhatchTf1: JBC TF1,T1O...[Details]
-
Power factor correction is to correct the distorted current into a sinusoidal current and make it in phase with the voltage, so that the power factor is close to 1. Improving the power factor is of g...[Details]
-
According to foreign media reports, a research team at the University of Michigan found that an aramid nanofiber network recycled from Kevlar can solve the problem of short cycle life of lithium-sulf...[Details]
-
The circuit in Figure 1 can provide a stable ±5V output when the input voltage is 2.5V to 5.5V. The low-dropout linear regulator (IC1) in Figure 1 takes the feedback signal from the output V+ of ...[Details]
-
This paper designs a lighting control system for smart home
applications
by combining remote control technology and single-chip microcomputer
. The system is a control system based on sin...[Details]
-
1. Main functions and features
1. It can simulate 63K program space, close to 64K 16-bit address space;
2. Can simulate 64Kxdata space, all 64K 16-bit address space;
3. Can truly...[Details]
-
The internal ADC of the STM8S003 microcontroller is 12 bits, and each channel of the A/D conversion can perform single and continuous conversion modes. Single conversion mode means that the ADC wil...[Details]
-
Our reporter Cao Qi A-share power battery manufacturers have disclosed their 2024 third quarter reports. According to Wind data, among all 30 listed companies in the A-share power battery sector, 11 a...[Details]