MEMS 1XN OPTICAL SWITCH
DiCon’s MEMS 1xN Optical Switch is an industry proven fiber optic
switch with excellent durability and reliability. It allows channel
selection between a single input fiber and N output fibers, and can
be specified for any 1xN size from 1x2 up to 1x24. In addition, this
optical switch is bi-directional and can be used in either a 1xN or
Nx1 direction.
FEATURES
Proven MEMS Durability and Reliability
Compact Form Factor
Fast Switching Time
APPLICATIONS
Optical Communications
Fiber Sensing
Bio-medical Instrumentation
Video Distribution
Specifications subject to change. Copyright © 2015 DiCon Fiberoptics, Inc. All rights reserved.
OPTICAL SPECIFICATIONS
1
PARAMETER
1x2, 1x4, 1x8
Insertion
Loss
2,3
1x12
1x16, 1x24
ORDERING INFORMATION
MS2
Product Code
MS2
MEMS Switch
RATING
0.8 dB max.
1.2 dB max.
1.5 dB max.
-50 dB max.
-50 dB max.
30 ms max.
0.40 dB max.
0.30 dB max.
0.10 dB max.
0.04 dB max.
10
9
cycles min.
500 mW max.
-5 to 70
o
C
-40 to 85
o
C
9/125
m
single mode
Switch Configuration
1xN
1xN, Specify N≤24
Crosstalk
Back Reflection
Switching Time
TDL
WDL
5
PDL
6
Repeatability
7
Durability
Optical Power
Operating Temp
Storage Temp
Fiber Type
4
Control Interface
I2C
RS2
TTL
I
2
C
RS232
TTL
Wavelength Range
13
15
16
13/15
15/16
1290 - 1330 nm
1530 - 1570 nm
1570 - 1610 nm
1290 - 1330 & 1530 - 1570 nm
1530 - 1570 & 1570 - 1610 nm
Fiber and Jacket Type
9/BF
9/LT
Corning SMF-28, Bare fiber
Corning SMF-28, Loose-tube
Or other equivalent 9
m
Singlemode
1. Specifications are without connectors.
2. IL is measured at CWL, 23
o
C.
3. IL is for single-band. Dual-band adds 0.2 dB.
4. Power off isolation is same as crosstalk.
5. WDL is measured in a +/- 20nm range at 23
o
C.
6. PDL is for single-band. Dual-band adds 0.05 dB.
7. Repeatability is defined after 100 cycles.
Connector Type
FC/SPC FC/SPC
FC/APC FC/APC
N
NONE
Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC
Pigtail Length
1
X
1 Meter
Specify X Meters
MECHANICAL DIMENSIONS
(Units: mm)
Tolerance is +/- 0.05 m
Top View
ELECTRICAL SPECIFICATIONS
MEMS 1xN OPTICAL SWITCH
BARE FIBER OR LOOSE TUBE
Left Side View
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com
0130I
MEMS 1XN OPTICAL SWITCH
PARAMETER
Latching Type
Control Type
Vcc
I
2
C, RS232
Voltage
TTL
Power
I
2
C, RS232
Consumption TTL
Connector Type
RATING
non-latching
I
2
C, RS232 or TTL
12 VDC
5 VDC
700 mW max.
1.5 W max.
Molex 87833-1620
SPECIFICATIONS / ORDERING INFORMATION
MEMS 1XN OPTICAL SWITCH