Y1690150R000B0L datasheet, PDF

Datasheet> All Categories > Passive components> Y1690150R000B0L

Y1690150R000B0L: Descriptionres 150 ohm 8W 0.1% to220; CategoryPassive components; File Size370KB，4 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Y1690150R000B0L Overview

res 150 ohm 8W 0.1% to220

Y1690150R000B0L Parametric

Parameter Name	Attribute value
Datasheets
VPR221Z Series (Z-Foil)
Standard Package	500
Category	Resistors
Family	Through Hole Resistors
Packaging	Bulk
Resistance (Ohms)	150
Tolerance	±0.1%
Power (Watts)	8W
Compositi	Metal Foil
Features	Moisture Resistant, Non-Inductive
Temperature Coefficie	±0.2ppm/°C
Package / Case	TO-220-4
Supplier Device Package	TO-220
Size / Dimensi	0.400" L x 0.150" W (10.16mm x 3.81mm)
Heigh	0.845" (21.46mm)
Number of Terminations	4

Preview

Download Datasheet

View All

VPR221Z (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Z-Foil Power Resistor in

TO-220 Configuration with TCR of ± 0.05 ppm/°C,

PCR of 4 ppm/W and Load Life Stability of ± 0.005 % (50 ppm)

FEATURES

Any value at any tolerance available within resistance range

INTRODUCTION

The Z-Foil Technology provides a significant reduction of the

resistive component’s sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR).

VPR221Z provides high rated power, excellent load life

stability , low Temperature Coefficient (TCR) and low Power

Coefficient (PCR) - all in one resistor. ± 0.05 ppm/°C

Absolute TCR removes error due to temperature gradients.

By taking advantage of the overall stability and reliability of

Bulk Metal

Z-Foil resistors, designers can significantly

reduce circuit errors and greatly improve overall circuit

performances.

Model VPR221Z is a 4 lead kelvin connected device.

Our Application Engineering Department is available to

advise and make recommendations. For non-standard

technical requirements and special applications, please

TABLE 1 - TCR AND TOLERANCE

TIGHTEST

RESISTANCE

TOLERANCE

± 0.05 %

RESISTANCE

RANGE ()

0.5 to < 1

1 to < 10

TYPICAL TCR AND

MAX. SPREAD

± 0.2 ppm/°C ± 2.8 ppm/°C

Percent of Rated Power

± 0.02 %

± 0.2 ppm/°C ± 2.3 ppm/°C

10 to 500

± 0.01 %

± 0.2 ppm/°C ± 1.8 ppm/°C

Notes

•

1. MIL-Range (- 55 °C to + 125 °C, + 25 °C Ref.)

Contact Applications Engineering for other available values

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 63116

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com



± 0.05 ppm/°C typical (0 °C to + 60 °C)

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.) (see table 1)

Tolerance: to ± 0.01 %

Power coefficient “R due to self heating”

4 ppm/W typical

Rated power: 8 W chassis mounted (MIL-PRF-39009)

Load life stability: to ± 0.005 % at 25 °C for 2000 hours,

at 1.5 W

Resistance range: 0.5



to 500



Electrostatic discharge (ESD) above 25 000 V

Short time overload



0.001 % (10 ppm)

Non-inductive, non-capacitive design

Rise time: 1 ns without ringing

Current noise <- 40 dB

Thermal EMF: 0.05 µV/°C typical

Voltage coefficient < 0.1 ppm/V

Non inductive: < 0.08 µH

Non hot spot design

Terminal finishes available: lead (Pb)-free

tin/lead alloy

Any value available within resistance range (e.g. 1K234)

For better performances please contact us



Temperature coefficient of resistance (TCR):

APPLICATIONS

Automatic test equipment (ATE)

High precision instrumentation

Electron beam application

Current sensing applications

Pulse applications

Military

Power amplifier

Power supplies

FIGURE 1- POWER DERATING CURVE

- 55 °C

100

- 75

- 50

- 25

100

125

150

Ambient Temperature (°C)

Legal Disclaimer Notice

Vishay Precision Group, Inc.

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in

any other disclosure relating to any product.

The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but

not limited to, the warranty expressed therein.

VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.

To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the

application or use of any product, (ii) any and all liability, including without limitation special, consequential or

incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,

non-infringement and merchantability.

Information provided in datasheets and/or specifications may vary from actual results in different applications and

performance may vary over time. Statements regarding the suitability of products for certain types of applications

are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s

responsibility to validate that a particular product with the properties described in the product specification is suitable for

use in a particular application. You should ensure you have the current version of the relevant information by contacting

VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any

conduct of VPG.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do

so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.

Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such

applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 15-Jul-2014

www.vpgsensors.com

Recommended Resources

Three-terminal fixed integrated stabilizer bipolar regulated power supply circuitb

Intelligent control module control port wiring

Power outage emergency light (1)

High-precision voltage regulator using KTA431 (TL431)

Staircase wave oscillator composed of sample/hold circuit

Python Machine Learning Basics Tutorial: Machine learning has become an integral part of many business applications and research projects. Massive amounts of data have made the application scope of machine learning far beyond people's imagin...; arui1999 Download Centre

GD32L233C-START Evaluation——02_1. Build development environment and simple debugging: [i=s]This post was last edited by wadeRen on 2022-1-18 17:20[/i]Preface01 briefly introduces the board and its main parameters. GD32L233C-START Review——01. Unboxing and Development Kit This article ma...; wadeRen GD32 MCU

what(): couldn't open /dev/video0: [i=s]This post was last edited by ienglgge on 2018-10-26 17:54[/i] ubuntu 16.04,ros needs to install the corresponding package [url]https://github.com/ros-drivers/camera_umd[/url] When running rosrun ...; ienglgge Embedded System

The Painful Experience of DSP Connecting to Emulator: Do not plug or unplug while power is on Do not plug or unplug while power is on Do not plug or unplug while power is on I have to say it three times. Although it is fine after plugging and unplugging ...; Jacktang DSP and ARM Processors

C2000 floating point calculation notes - differences between CPU and CLA and error handling techniques: The C2000 microprocessor with C28x+FPU architecture adds some registers and instructions to the original C28x fixed-point CPU to support IEEE single-precision floating-point operations. The floating-p...; fish001 DSP and ARM Processors

When Kicad moves a line individually, the line is actually disconnected when moving. How to solve this problem?: Hello everyone, I just started using Kicad. When drawing a PCB, I want to drag the lines, but the lines are disconnected (as shown below). Can the entire line be linked like AD?...; xindela PCB Design

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components