The output of the comparator LM239DRG has a 10k pull-up resistor, which is connected to the input of the OR gate 74AHC32D. It is found that no matter what, the voltage at this point is always very low...
HPM6750 contains a 16-bit ADC with a 2MSPS sampling rate. It looks very attractive. Let's try connecting it.Use the ADC16 routine in the official SDK, dig out the old 51 development board, use the pot...
[i=s]This post was last edited by Feng Xuetian on 2019-1-20 22:22[/i] [align=left]In the last two weeks of the evaluation, we planned to build a comprehensive project based on Rapid IoT, "Smart Home T...
1. When CCS is connected to the DSP, select CPU Reset (Ctrl+Shift+R) and move the PC pointer to position 3ff8a1.At this time, the program's PLLSTS[8:7].DIVSEL=10b (0x0101); PLLCR[].DIV=1100b (0x000C);...
Is the simulation accurate?The question I am most often asked is: Is the simulation accurate? Most engineers will say that if there is no accurate device model, the simulation will not be accurate.
I ...
PA controllers are used in base station systems to provide the PA with the required precise gate voltage. The current MIMO system has a large number of channels, and at the same time, each channel has...