Features ....................................................................................................................................................................................... 1
Typical Phase Jitter (70 fs RMS) and Phase Noise Data ............................................................................................................. 2
Ordering Information .................................................................................................................................................................... 3
LVPECL and FlexSwing Termination .................................................................................................................................. 19
LVDS, Supply Voltage: 1.8 V
±5%,
2.5 V ±10%, 3.3 V ±10%, 2.25 V to 3.63 V, 1.71 V to 3.63 V ...................................... 20
HCSL, Supply Voltage: 1.8 V
±5%,
2.5 V ±10%, 3.3 V ±10%, 2.25 V to 3.63 V, 1.71 V to 3.63 V ...................................... 20
Low-power HCSL, Supply Voltage: 1.8 V
±5%,
2.5 V ±10%, 3.3 V ±10%, 2.25 V to 3.63 V, 1.71 V to 3.63 V .................... 20
Dimensions and Patterns ― 2.0 x 1.6 mm x mm ....................................................................................................................... 21
Dimensions and Patterns ― 2.5 x 2.0 mm x mm ....................................................................................................................... 22
Dimensions and Patterns ― 3.2 x 2.5 mm x mm ....................................................................................................................... 23
Revision History ......................................................................................................................................................................... 24
Rev 0.54
Page 4 of 25
www.sitime.com
SiT9501
Ultra-low Jitter Differential XO for Standard Networking Frequencies
Electrical Characteristics
ADVANCED
All Min and Max limits in the Electrical Characteristics tables are specified over operating temperature and rated operating
voltage with standard output termination shown in the termination diagrams. Typical values are at 25°C and nominal
supply voltage.
Table 3. Electrical Characteristics – Common to All Output Signaling Types
Parameter
Output Frequency Range
Symbol
f
Min.
Typ.
Max.
Unit
MHz
Condition
Refer to frequencies listed in
Error! Not a valid result for table.
s
ection.
Inclusive of initial tolerance, operating temperature, rated power
supply voltage, load variation of 15 pF
±
10%, and 10 years
aging at 25°C
Inclusive of initial tolerance, operating temperature, rated power
supply voltage, load variation of 15 pF
±
10%, and first year aging
at 25°C
Ambient temperature of 25°C
Extended commercial, ambient temperature
Industrial, ambient temperature
Ambient temperature
Extended industrial, ambient temperature
Voltage-supply order code “YY”
Voltage-supply order code “XX”
Voltage-supply order code “18”.
Contact SiTime
for 1.5 V
Voltage-supply order code “25”
Voltage-supply order code “33”
Pins 1 and 2 for OE and SE, respectively
Pins 1 and 2 for OE and SE, respectively
Pins 1 and 2 for OE and SE, respectively
See
Figure 6
and
Figure 8
Measured from the time Vdd reaches its rated minimum value
Measured from the time OE pin toggles to enable logic level to
the time clock pins reach 90% of swing. See
Figure 13
Measured from the time OE pin toggles to disable logic level to
the last clock edge. See
Figure 14
12 kHz to 20 MHz offset frequency integration bandwidth
[i=s]This post was last edited by Digital Leaf on 2022-4-19 08:26[/i]The HDF (Hardware Driver Foundation) driver framework provides driver developers with driver framework capabilities, including driv...
[i=s]This post was last edited by RCSN on 2020-7-21 11:19[/i]The author has actually been thinking about this board for a long time, and there happened to be this review activity on the forum, so he a...
Under the ZIGBEE protocol, the data transmission rate is greater than 100Kbps and the communication distance is greater than 100m, forming a wireless sensor network....
[i=s]This post was last edited by Digital Leaf on 2022-11-7 21:46[/i]Xingkongban officially recommends five programming methods: Mind+, Jupyter, Thonny, SSH connection, and VScode. Try each one in tur...
High voltage industrial and automotive systems such as factory automation equipment, grid infrastructure applications, motor drives, and electric vehicles (EVs) can generate hundreds to thousands of v...
Variable frequency power supply can simulate the voltage standards of countries around the world. Variable frequency power supply is suitable for resistive, capacitive, inductive and other non-linear ...
Preface
Control methods can be mainly divided into two categories: feedback control and feedforward control. Usually, our attention is focused on feedback control because feedback control can ...[Details]
01Technical Introduction
Iron-chromium flow batteries are inherently safe, stable in operation, and have long-term energy storage. Currently, the product has been updated to the second-gen...[Details]
1 Introduction At present, my country's coal production mechanization is developing rapidly. The application of fully mechanized mining equipment is a measure to improve efficiency and safety. One of...[Details]
Recently, the General Administration of Customs released the import and export data of inverters from January to February 2023. According to the customs data:
Import and export situation in Ja...[Details]
1. Overview of Machine Vision
Machine vision is the process of automatically receiving and processing images of real objects through optical devices and sensors to obtain the required informat...[Details]
When the nameplate is lost and you do not know the number of poles of the original asynchronous motor, you can use the current μA range of the multimeter to test and judge. The method is: Open the ...[Details]
1 Overview
Due to the importance of the parking mechanism in the automatic transmission, its design, analysis, and calculation are of great significance. Taking the parking mechanism of a cont...[Details]
On September 6, Micron stated in a technical blog released this month that its "production-capable" 12-layer stacked HBM3E 36GB memory is now being delivered to major industry partners for verifica...[Details]
In the field of electronic assembly, surface usually refers to the external surface of printed circuit boards (PCBs), chips and other components, that is, the surfaces in contact with the surrounding...[Details]
Recently, Hefei No. 1 Intelligent Technology Co., Ltd. (hereinafter referred to as "No. 1 Intelligent") completed its angel round of financing with a valuation of nearly 100 million yuan. The inves...[Details]
The new R&S ESR EMI test receiver uses FFT-based time domain scanning to perform standards-compliant interference measurements up to 6000 times faster than conventional EMI test receivers. It provide...[Details]
Omron Automation (China) Co., Ltd.’s new product was officially released. This product is based on Omron's thorough research on the equipment needs of Chinese OEM customers. It is independently deve...[Details]
Linux and Android
京公网安备 11010802033920号
EEWORLD
