Previously, I used lwip1.4.1, which had the concept of varbindlist. Each varbind to be sent was combined into a list, and then a trap was sent.
Now I am using lwip2.1.2, which does not have the concep...
stopped external ....by other core It always fails to execute. When I disable GPIO_IPINPUTConneced of pin 6.6, I can send content. But I can't receive. The similar program has been implemented on UART...
Continued from the previous article~~~~~
Continue the decoupling/bypass journey~~~~~~~·
This article explains in detail the effects of ESR and ESL on decoupling through examples. By comparing theoreti...
My new computer arrived today. When I bought it, there were 512+1T hard drives and 512 only hard drives. Since I have a lot of hard drives and I plan to install them myself, I didn't choose the one wi...
1. The failure conditions are as follows:The driver installation is correct (the board is automatically installed after the USB is plugged in):
If the MCU selected in config is correct, an error will ...