TRG26F2CEWEN

According to BCN, the Japan Electronics and Information Technology Industries Association (JEITA) held a press conference in Tokyo on December 18, announcing that global demand for 5G will reach 168....[Details]

1 Introduction Currently, the embedded development field has more and more product requirements. Such as communication speed, stability, product functions, scalability, portability, adaptability, etc...[Details]

The chemical protection performance tester is a test system for testing the acid and alkali permeability of protective clothing and other protective equipment. The system can output permeability data...[Details]

            By Don Schoenecker, Oscilloscope Product Planner, Keysight Technologies It’s hard not to mention the versatility of an oscilloscope when it comes to testing electronic devices. To verif...[Details]

Vesper , a supplier of piezoelectric MEMS sensors, announced the launch of the VM3011, the industry’s first smart digital microphone with Adaptive ZeroPower Listening™ technology, which uses a disrup...[Details]

　　The circuit of this device is shown in the figure. The AC voltage output by the magneto is rectified by diodes D1~D6 and becomes a pulsating DC voltage, which is output in two ways. One way is a ty...[Details]

The multimeter can not only be used to measure the resistance of the object being measured, but also the AC and DC voltages and DC voltages. Some multimeters can even measure the main parameters of t...[Details]

1. Introduction LED modules are now widely used in electronic products. With the expansion of the application scope and the continuous improvement of lighting systems, the ...[Details]

1. Header File In the #include reg52.h header file, the register addresses in the microcontroller are encapsulated and defined as macros for us to call. As a beginner, we don't need to understand the...[Details]

Oscilloscopes are one of the key instruments in electronic design and test because of their extensive toolset and application flexibility. Customization can simplify testing, proprietary processing, a...[Details]

Since the requirements for solid crystal are extremely high when encapsulating single-electrode chips, the use of conductive glue and conductive silver glue in the solid crystal process is also extrem...[Details]

MOV C, BIT  The function of MOV BIT , C  is to transfer data between the bit accumulator (CY) and other bit addresses.  Example: MOV P1.0, CY; Send the status in CY to the P1.0 pin (if we are doing...[Details]

1. The oscilloscope must be calibrated and compensated before use. The purpose of calibration is to optimize the current measured value and not be affected by the external temperature environment, et...[Details]

According to sisajournal-e, the supplier of optical adhesive film (OCA) for Huawei's foldable smartphone Mate X may change, which is expected to have an impact on product development. It was report...[Details]

Source: Getty Images/Jae Young Ju Infineon Technologies has introduced a new touch controller, the automotive-grade PSoC Multi-Touch GEN8XL (IAAT818X), to meet the growing demand for adv...[Details]