The non-synchronous flyback topology is widely used in isolated power supplies, ranging from sub-1W to tens of Watts. As more and more “green mode” standards emerge around the world, the requirements ...
[color=#333333][font="][size=14px]There are 6 common surface treatment processes at present: [/size][/font][/color] [color=#333333][font="][size=14px]1. Hot air leveling [/size][/font][/color] [color=...
[i=s]This post was last edited by MianQi on 2021-2-19 10:20[/i]In the previous post, I tried to use EXTI but got an error. I wanted to start testing the assembly code according to the evaluation plan ...
[size=4]Question: A 23-string protection board was designed using BQ76940. During the test, a serious BUG was found. When the sampling line falls off or the battery pack is broken, the BQ chip or the ...
I have finally completed the work developed for my creative project. This post contains the first three sections of the work design description document.1. Project Background
Whether during constructi...
There is a program with 10 feeders in total, each with a light control signal to control the material level. When working, the rear one waits for the front one to finish and then feeds the materials i...