-
1. Electronic balance and its classification
The balance that uses electromagnetic force to balance the weight of the object being weighed is called an electronic balance. Its characterist...[Details]
-
From October 31 to November 1, the Global New Energy Vehicle Cooperation and Development (Shanghai) Forum (GNEV2024•Shanghai) hosted by the China Electric Vehicle 100 was officially held.
Wit...[Details]
-
Recently, Texas Instruments (TI) announced the launch of the second device in the PurePath Wireless audio product series, bringing the latest applications to consumer, portable and high-end audio....[Details]
-
Apple is considering the possibility of bringing iPhone manufacturing to Vietnam after the Cupertino company visited a factory owned by assembly partner Luxshare to check the factory's environ...[Details]
-
At present, there are three main manufacturing forms of infrared lamps: 1. Halogen lamps, 2. Multi-chip LEDs, and 3. Single-chip LEDs.
Explosion proof camera infrared light
Halogen l...[Details]
-
Motor operating temperature standard
Generally speaking, if the insulation grade of the motor is A and the ambient temperature is 40℃, the casing temperature of the motor should be less than 6...[Details]
-
LCD and controller interface circuit diagram: In the interface circuit design, since the LM320160CCW LCD display module is powered by 5 V, and the microcontroller is powered by 3.3 V, they cannot be ...[Details]
-
1 Introduction Highly integrated circuit with serial interface and Δ-Σ analog/digital converter capable of high-speed power (electric energy) calculation. The CS5463 can measure voltage by using a lo...[Details]
-
Author: Nikolaos Terzopoulos, Senior Hardware Engineer, Dialog Semiconductor; Marios Iliopoulos, director of applications, Dialog Semiconductor; Panagiotis Rozos, hardware applica...[Details]
-
Question one: //TIM2 pre-scaling setting: 1MHZ, APB1 division factor 2, input to TIM3 clock is 36MHzx2 = 72MHz TIM_PrescalerConfig(TIM2,71, TIM_PSCReloadMode_Immediate); void TIM_PrescalerConfig(...[Details]
-
On June 3, Hua Hong Semiconductor Co., Ltd. announced that its 90nm BCD process has achieved large-scale mass production on Hua Hong's Wuxi 12-inch production line with its high-performance indicator...[Details]
-
O Introduction
At present, there are many electronic locks based on IC card design on the market, which are widely used in hotels, apartments, warehouses, schools and other places. These occasions c...[Details]
-
Introduce the XTAL1 and XTAL2 pins: The XTAL1 and XTAL2 pins are used for the crystal oscillator and the crystal oscillator to generate the clock signal. 1. After connecting to the crystal oscillator...[Details]
-
Introduction In the late 1980s, research on compaction meters began in China, and an airborne compaction meter was also developed. Due to the use of digital tube display, advanced computer technolo...[Details]
-
1. Experimental Setup The experimental devices used in this study are respectively the steam flow metering standard device of condensation weighing method, the gas flow metering standard device of ...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD