Standard Frequencies – see Page 5 for developed frequencies.
* Check with factory for availability of frequencies not listed.
Applications
Automotive Electronics
Mobile Multimedia/Infotainment
Car Navigation Systems
Internet of Things [IoT, IIot]
Microcontrollers and FPGAs
Wireless Communication
Ethernet/GbE/SyncE
Medical Electronics
Commercial Military & Aerospace
Description
CTS Model SA254 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate
over extended temperature ranges for use in automotive electronics.
Ordering Information
Model
SA254
Frequency Code
[MHz]
XXX
Mode of
Oscillation
F
Tolerance
@ +25°C
3
Temperature
Stability
5
Temperature
Range
G
Load
Capacitance
A
Packaging
R
Code
Frequency
Product Frequency Code
1
Code
1
X
2
3
5
Tolerance
±10ppm
±15ppm
±20ppm
±30ppm
±50ppm
Code
I
G
H
N
P
M
Stability
±15ppm
±20ppm
±30ppm
Code
5
6
7
Temp. Range
2
-40°C to +85°C
-40°C to +105°C
3
4
-40°C to +125°C
-40°C to +150°C
5
5
-55°C to +105°C
-55°C to +125°C
5
Packing
Code
3k pcs./reel
R
Code
F
Mode
Fundamental
Code
X
2
3
Stability
±50ppm
±100ppm
±150ppm
Code Capacitance Code Capacitance
7pF
16pF
V
C
8pF
18pF
K
D
9pF
20pF
J
E
10pF
24pF
A
F
12pF
30pF
L
G
13pF
Series
B
S
Notes:
1]
2]
3]
4]
5]
Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
Available with all stability codes.
Available with stability codes 3, 5, 6 and 7.
Available with stability codes 5, 6 and 7.
Stability codes 6 and 7. Contact factory for code 5 availability.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
Program function: Configure GPIO12 as interrupt input. When the button is pressed, a falling edge interrupt is triggered, and the interrupt service subroutine flips the LED.
Interrupt vector tableMain...
[color=rgb(51, 51, 51)][font="][size=14px]SN-D2 is a power tube gate driver IC designed for bridge circuits using dual N-channel VDMOS power tubes. It can be used in DC brushed, DC brushless motors an...
I would like to ask, when using the M5311 module for NB project, how is the communication encryption between the device and the ONENET platform done? I have read some materials and videos, but I can't...
Currently, there are three main types of light sources for car headlights on the market: halogen, xenon and LED headlights. Halogen headlights are the main element of car light fillers, and the main e...
Desuo Precision Industrial Engineer pointed out that connectors for new energy vehicles are one of the main types of connectors. In recent years, with the development of new energy vehicles in the ...[Details]
Due to the high technical threshold and the relatively early overall layout of foreign-funded enterprises, the wire-controlled chassis market has been monopolized by international Tier 1 for a long t...[Details]
1. Overview PXI technology is the product of the combination of Compact PCI and instrumentation technology. With the formulation and release of the PXI 2.0 specification, PXI products are becoming mo...[Details]
introduction
The research field of intelligent transportation system is very broad, and the focus of each country and region is also different. For example, the electronic toll collec...[Details]
According to foreign media reports, the Indian government has established a high-level advisory committee to promote the Semicon India initiative and provide advice for the development of the semicon...[Details]
1 Introduction The oscilloscope is a basic instrument for electronic measurements. Due to its real-time, intuitive and vivid graphics display characteristics, it is also one of the commonly used inst...[Details]
Kangyi Intelligent Equipment Technology Production Base is located in the beautiful Yellow Sea coast, Dongtai City, in the Linta Electromechanical Industrial Park of Dongtai City. It currently has ...[Details]
With the continuous penetration of electronic technology and information technology in people's lives, the number of electronic products is increasing. Its energy consumption has greatly exceeded...[Details]
This application is very simple and mainly shows how to drive four RGB LED indicators using an ATtiny85 microcontroller . Each LED can be set to one of 16 different levels, from off to full brigh...[Details]
According to the news from Jiwei.com, the team of Academician Guo Guangcan of the University of Science and Technology of China has made important progress in the field of quantum storage. Li Chuanfe...[Details]
Automotive supply chain manufacturer ON Semiconductor has released a DC ultra-fast charging pile solution and launched nine new EliteSiC power integrated modules (PIM), which can provide bidirectiona...[Details]
Samsung Electronics said it has opened a new R&D research laboratory in Silicon Valley, USA, to focus on the development of next-generation 3D DRAM chips. The laboratory, operated by Device Solution...[Details]
In the process of single-chip microcomputer development, from hardware design to software design, almost all of them are completed by the developer himself according to the characteristics of the sys...[Details]
The basic idea of active noise control was first proposed by German physicist Paul Lueg when he invented the "electronic muffler" in 1936. Compared with traditional passive control, active noise co...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
