-
1. Key points of timer/counter PWM design According to the characteristics of PWM, the following points should be noted when using the ATmega128 timer/counter to design output PWM: 1. First, the PWM ...[Details]
-
As the global wireless headset business scale gradually expands, Apple, as the industry leader, is also constantly improving and developing AirPods, and it is expected that the new AirPods will have ...[Details]
-
Working Principle of Photo-controlled Thyristor
When a positive voltage is applied to the anode of the photo-controlled thyristor and a negative voltage is applied to the cathode, ...[Details]
-
Europe's car sales data for August is out. In the face of a severe chip shortage, overall auto sales in major European countries have declined both month-on-month and year-on-year, but sales of ne...[Details]
-
The DS1091L is a low-cost clock generator with factory preset output frequencies from 130kHz to 66.6MHz with a nominal accuracy of ±0.25%. The device can generate center-dithered or down-dithe...[Details]
-
Compared with the single-stage inverter, the single-phase two-stage photovoltaic grid-connected inverter has a complex structure, but the front and rear stages can be controlled separately, and the c...[Details]
-
Huilun Crystal said in an institutional survey that the company's photolithography process has advantages in the output rate of high-frequency chip production and the accuracy of photolithography ele...[Details]
-
Currently, an Android application has appeared that can skip the verification interface of the operator's WLAN user login and directly use the operator's WLAN hotspot. After personal attempts by re...[Details]
-
With the continuous improvement of science and technology, mechanical engineering vibration testing technology has also entered a new stage. Dynamic signal analysis, as a comprehensive technology aim...[Details]
-
Seoul, June 9, 2022 – SK Hynix Inc. (or “the Company”, www.skhynix.com) announced that it has begun mass production of HBM3, the industry’s best performance DRAM. * HBM (High Bandwidth Memory): It is...[Details]
-
Traditional temperature detection mostly uses thermistors as temperature sensors, but thermistors have poor reliability and low temperature measurement accuracy, and must be converted into digital si...[Details]
-
AVR has three timer counters, of which timer counter 0 and timer counter 2 are 8 bits, and timer counter 1 is 16 bits. When I was learning about AVR timers, I was confused by a lot of registers at fi...[Details]
-
The LED fluorescent lamp power supply is the most important component in the LED fluorescent lamp. If it is not selected properly, the LED fluorescent lamp cannot perform its performance or even cann...[Details]
-
On September 28, the 27th Xuzhou Investment Promotion Conference 2024 was held on the shores of Dalong Lake. With the theme of "Pengcheng Dreams, Moving Towards the New", this conference attracted ...[Details]
-
Linear regulator integrated circuits (ICs) step down voltage from a higher voltage to a lower voltage without the need for an inductor. A low dropout (LDO) linear regulator is a special type of l...[Details]