he RG series is a family of cost effective 1.5W single & dual output DC-DC converters. These converters combine Plastic case in a 24-
pin DIL package with high performance features such as 1500 VDC ~ 3500VDC input/output isolation voltage, continuous short circuit
protection with automatic restart and tight line / load regulation. Devices are encapsulated using flame retardant resin. Input voltages of
5,12,24 and 48 with output voltage of 5, 9, 12, 15, 24,
±5, ±9, ±12, ±15
and
±24
Vdc. High performance features include high efficiency
operation up to 78% and output voltage accuracy of
±1%
maximum.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
OUTPUT SPECIFICATIONS
Voltage accuracy
Line regulation
Load regulation
Ripple & noise
(20 MHz bandwidth)(1)
Short circuit protection
Temperature coefficient
Capacitor load
(2)
INPUT SPECIFICATIONS
Voltage Range
Max. Input Current
No-Load Input Current
Input Filter
Input Reflected Ripple Current
(3)
GENERAL SPECIFICATIONS
Efficiency
I/O Isolation Voltage
(3 sec)
Input/Output
Metal Case/Input & Output
I/O Isolation Capacitance
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF
(MIL-HDBK-217 F)
Safety Standard :
(designed to meet)
±1%
±0.5%
±0.5%
60mV pk-pk
Continuous
±0.02%/°C
See table
PHYSICAL SPECIFICATIONS
Case Material
Non-conductive Black Plastic(UL94V-0 rated)
Nickel-coated Copper
Non-conductive Black Plastic(UL94V-0 rated)
Base Material
¨0.5mm
Brass Solder-coated
Pin Material
Potting Material
Epoxy (UL94V-0 rated)
Weight
12.5g(Plastic Case)/15.0g(Metal
Case)
Dimensions
1.25”x0.8”x0.4”
ENVIRONMENT SPECIFICATIONS
Operating Temperature
-40° ~85°
See Derating Curve)
Maximum Case Temperature
100°
Storage Temperature
-40° ~125°
Cooling
Nature Convection
ABSOLUTE MAXIMUM RATINGS
(4)
These are stress ratings. Exposure of devices to any of these
conditions may adversely affect long-term reliability.
Input Voltage
(100mS)
5 Modes
-0.7~15 Vdc
12 Modes
-0.7~24 Vdc
24 Modes
-0.7~40 Vdc
48 Modes
-0.7~80 Vdc
Lead Soldering Temperature
60°
(1.5mm from case 10 sec.)
T
See table
See table
See table
PI Type
35mA pk-pk
See table
, typ
1500~3500Vdc
1000Vdc
60 pF Typ.
1000M Ohm
100~400kHz
95% rel H
>2.199 Mhrs
IEC 60950-1:2001
The information and specifications contained in this data sheet are believed to be correct at time of publication. However,
MOTIEN Technologies
accepts no responsibility
for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any
such product(s) or information contained herein.
1
RG - 1.5W 2:1 Regulated Single & Dual output
PART NUMBER STRUCTURE
Derating Curve
R G - 24 05 S 1 H M
OUTPUT POWER
Series Name
Input Voltage Range
05
- 4.5 ~ 9V
12
- 9 ~ 18V
24
- 18 ~ 36 V
48
- 36 ~ 72 V
1.5 Watt
Metal Case.
Optional, if no suffix " M"
mean plastic Case
3.5KVdc Isolation.
Optional, if no suffix "H"
mean1.5KVdc Isolation
100%
75%
50%
Output Type
S
- Single output
D
- Dual Output
S.O.A.
-20
0
20
40
60
80
85
25%
Output Voltage
5
- 5V
9
- 9V
12
- 12V
15
- 15V
24
- 24V
-40
100
120
AMBIENT TEMPERATURE(°
MODEL SELECTION GUIDE
MODEL NUMBER
RG-0505S1
RG-0509S1
RG-0512S1
RG-0515S1
RG-0524S1
RG-0505D1
RG-0509D1
RG-0512D1
RG-0515D1
RG-0524D1
RG-1205S1
RG-1209S1
RG-1212S1
RG-1215S1
RG-1224S1
RG-1205D1
RG-1209D1
RG-1212D1
RG-1215D1
RG-1224D1
RG-2405S1
RG-2409S1
RG-2412S1
RG-2415S1
RG-2424S1
RG-2405D1
RG-2409D1
RG-2412D1
RG-2415D1
RG-2424D1
INPUT
Voltage Range
(Vdc)
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
INPUT Current
No-Load
Full Load
(mA)
(mA)
40
461
40
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
20
20
20
12
12
12
12
12
12
12
12
12
12
447
428
447
454
461
447
428
447
454
169
162
164
160
160
169
164
166
160
160
84.5
84.5
82
82
81
83
82
81
80
80
OUTPUT
Voltage
(Vdc)
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
OUTPUT Current
Min. load
Full load
(mA)
(mA)
75
300
41.7
125
31
15.6
37.5
20.8
15.6
12.5
7.7
75
41.7
125
31
15.6
37.5
20.8
15.6
12.5
7.7
75
41.7
125
31
15.6
37.5
20.8
15.6
12.5
7.7
167
125
100
62.5
150
83.3
62.5
50
31
300
167
125
100
62.5
150
83.3
62.5
50
31
300
167
125
100
62.5
150
83.3
62.5
50
31
EFFICIENCY
@FL(%)
65
67
70
67
66
65
67
70
67
66
74
77
76
78
78
74
76
75
78
78
74
74
76
76
77
75
76
77
78
78
Capacitor
Load(uF)
2200
470
470
470
220
1000
220
220
220
100
2200
470
470
470
220
1000
220
220
220
100
2200
470
470
470
220
1000
220
220
220
100
Suffix
“H”
means 3.5KVdc isolation
Suffix
“M”
means Metal Case instead of standard Plastic case
The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail
to : sales@motien.com.tw
2
RG - 1.5W 2:1 Regulated Single & Dual output
INPUT
Voltage Range
(Vdc)
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
INPUT Current
No-Load
Full Load
(mA)
(mA)
8
43
8
8
8
8
8
8
8
8
8
42
40.5
40.5
40
42
42
40.5
40
40
OUTPUT
Voltage
(Vdc)
5
9
12
15
24
5
9
12
15
24
OUTPUT Current
Min. load
Full load
(mA)
(mA)
75
300
41.7
125
31
15.6
37.5
20.8
15.6
12.5
7.7
167
125
100
62.5
150
83.3
62.5
50
31
MODEL NUMBER
RG-4805S1
RG-4809S1
RG-4812S1
RG-4815S1
RG-4824S1
RG-4805D1
RG-4809D1
RG-4812D1
RG-4815D1
RG-4824D1
EFFICIENCY
@FL(%)
73
75
77
77
78
74
75
77
78
78
Capacitor
Load(uF)
2200
470
470
470
220
1000
220
220
220
100
Suffix
“H”
means 3.5KVdc isolation
Suffix
“M”
means Metal Case instead of standard Plastic case
NOTE
1.
2.
3.
4.
5.
6.
Typical value at nominal input voltage and full load.
Test by nominal input voltage and constant resistor load.
Measured Input reflected ripple current with a simulated source inductance of 12uH.
Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating.
Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications.
It’s necessary to add minimum capacitor in output for some models, please check single model datasheet for detail value.
MECHANICAL SPECIFICATIONS FOR HIGH ISOLATION MODEL
31.75
(1.25)
Printed Face
10.16
(0.40)
PIN CONNECTIONS
PIN NUMBER
1
SINGLE
+V Input
+V Input
N.C.
N.C.
-V Output
+V Output
N.C.
-V Input
-V Input
DUAL
+V Input
+V Input
Common
Common
N.C.
V Output
+V Output
-V Input
-V Input
20.32
(0.80)
DC-DC CONVERTER
RG-XXXXXX
MOTIEN
d/c
27.94
(1.10)
3.05
(0.12)
Min.
2
10
11
12
13
2.54
(0.10)
0.50
(0.02)
1 2
24 Pin DIL Package
Non-Conductive Plastic
10 11 12
Bottom View
24 23
15
13
15.24
(0.60)
15
Notes: All dimensions are typical in millimeters ( inches ).
1. Pin diameter: 1.0
±0.05
( 0.02
±0.002
)
2. Pin pitch tolerance:
±0.35
(
±0.014
)
3. Case Tolerance:
±0.5
(
±0.02
)
23
24
0.50
(0.02)
5.08
(0.20)
The Pin Connection of high isolation one is the same with normal one.
The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail
to : sales@motien.com.tw
3
RG - 1.5W 2:1 Regulated Single & Dual output
MECHANICAL SPECIFICATIONS
PIN CONNECTIONS
31.75
(1.25)
2.54
(0.10)
0.50
(0.02)
27.94
(1.10)
PIN NUMBER
1
SINGLE
+V Input
+V Input
N.C.
N.C.
-V Output
+V Output
N.C.
-V Input
-V Input
DUAL
+V Input
+V Input
Common
Common
N.C.
V Output
+V Output
-V Input
-V Input
DC-DC CONVERTER
RG-XXXXXM
MOTIEN
d/c
Printed Face
1 2
10 11 12
2
20.32
(0.80)
Bottom View
24 23
15
13
15.24
(0.60)
10
11
Built-in stand-offs
to ease PCB cleaning
0.50
(0.02)
5.04
(0.20)
12
13
15
For
“M” Case
10.16
(0.40)
24 Pin DIL Package
Nickel-Coated Copper
Min.
23
24
3.05
(0.12)
Notes: All dimensions are typical in millimeters ( inches ).
1. Pin diameter: 1.0
±0.05
( 0.02
±0.002
)
2. Pin pitch tolerance:
±0.35
(
±0.014
)
3. Case Tolerance:
±0.5
(
±0.02
)
The Pin Connection of high isolation one is the same with normal one.
MOTIEN
ISO 9001:2000 REGISTERED
No. 9, Keji 2nd Rd., Technology Industrial Park, Tainan City 70955, Taiwan
[size=4][color=#000000]Double loops and multiple loops may seem complicated, but in fact, the optimization method for multiple loops is relatively simple. It all depends on one word: "split". Once thi...
Use NIOS as a soft-core processor to output four-way signals: sawtooth wave, sine wave, square wave, triangle wave. I don't understand the principle. Can anyone give me some guidance?...
Introduction Cash registers are electronic products that are becoming popular in various commercial fields. Since the use of cash registers can simplify commodity management and save manpower, variou...
stm32: Generalize flash mounting code so it supports arbitrary FS.This commit refactors and generalizes the boot mount routine on the stm32 so that it can mount any type of filesystem. That is, it no ...
This section mainly explains the communication of single-chip microcomputers. Communication mainly refers to the communication between single-chip microcomputers and external devices, that is, transmi...[Details]
LED lighting replacements for halogen, incandescent, or fluorescent lamps present two design challenges:
1. Meet the size requirements
2. Electrical specifications are compatible with exis...[Details]
The first and most common circuit topology that everyone may come into contact with is probably flyback. At least when I first came into contact with power supplies, the first one I used was flybac...[Details]
Capillary viscometers can be divided into four types according to their structure and shape: Ubbelohde, Finn, Pininfarina, and countercurrent. The sample viscosity they measure is the kinematic vi...[Details]
According to the requirements of the Autonomous Region Development and Reform Commission's "Notice on Accelerating the Coordinated Development of New Energy and Related Industries" (New Development...[Details]
Through the rectification case of the switching power supply module's surge interference resistance, it was analyzed that the main reason for the failure of the power board during the surge impact ...[Details]
China's automobile industry started late, and it is basically hopeless to compete with overseas brands in the field of traditional fuel vehicles. Therefore, domestic brands have set their sights on t...[Details]
The difference between shift instructions and rotate instructions
Shift instructions and circular shift instructions are common operation instructions in computer architecture, which are used ...[Details]
TPS6302x is a high-efficiency small buck-boost power
solution
from TI
. The input voltage ranges from 1.8V to 5.5V, the output current can be up to 3A, the fixed and adjustable output voltag...[Details]
BYD's E3.0 platform has made many technological innovations, including four domain controllers, BYD OS, all-in-one controller, etc. These technologies have been reflected in the first car of BYD's ...[Details]
With the rapid development of human society towards informatization, the civil air defense system has become an important part of modern national defense construction. Civil air defense refers to the ...[Details]
///////////////24MHZ时钟设置////////////////////////////////////////////////////////////// UCSCTL3 |=SELREF__REFOCLK; __bis_SR_register(SCG0); //disable the FLL control loop UCSCTL0=0X0000;//...[Details]
According to news on January 17, the MIPS technology licensing contract dispute that lasted for nearly three years between Loongson Zhongke and Xinlianxin recently came to an end - Loongson won a big...[Details]
1. Run the registration machine 2. After copying and pasting the CID, select ARM, MDK Professional 3. Run Generate, the registration machine generates a registration code ...[Details]
Regarding the evolution of automotive electronic and electrical architecture, the most discussed in the industry is the six stages of electronic and electrical architecture development proposed by ...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
