Parallel - Fundamental Quartz Crystal, 20MHz Nom, SMD, 4 PIN
ABM82-20.000MHZ-18-N3-T Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206867871
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.005%
frequency tolerance
25 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
20 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.6mm
Series resistance
50 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM82-20.000MHZ-18-N3-T Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Hardware vulnerabilities can affect the security of computers, medical devices, and systems. Secure enclaves and trust roots are not enough. Computer security researchers have disclosed two major pro...
At the beginning, when I paid the insurance, I checked on my mobile phone and it said that I could receive more than 3,800 yuan per month when I retired.But after June, it seems that the national insu...
In the design of high-speed signal circuits, signal conditioning products are widely used. Among them, retimer products involve register configuration, so their use is relatively complicated. This art...
ESK32-360 – Development Board for HT32F1653/1654The ESK32-360 development board is designed for the HT32F1653/1654 series MCUs and uses a HT32F1654 physical IC. It is equipped with buzzer, input keys,...
TD8310 permanent magnet material measurement and testing system consists of bipolar DC magnetizing power supply, magnetic measurement device, electromagnet, test coil or probe, system-level software, ...
As shown in the figure, when using Allegro simulation, IBIS needs to be converted into DML. However, when opening it with Model Integrity, the error shown above is reported. But where can I modify thi...
"Looking back at the Synopsys Wuhan Global R&D Center project, it was first initiated in 2010 when Synopsys President and Co-CEO Dr. Chih-Kuan Chen was invited by local leaders to visit Wuhan after a...[Details]
The lighting industry is constantly developing, and LED lamps are constantly competing with traditional lamps. There are many manufacturers producing LEDs and LED lighting fixtures. Different manuf...[Details]
When I first started working, I participated in embedded code optimization. In addition to the most basic function implementation algorithm optimization, there were also some details to deal with. Of...[Details]
Bringing driverless cars to reality
The "star track" of autonomous driving has been affected by policy lags and the capital winter. It has been struggling in the past period of time. Many ...[Details]
According to U.S. media reports, on Thursday, U.S. senators from both parties warned the Trump administration not to use Huawei as a bargaining chip. They said the action taken against Huawei was rel...[Details]
Recently, at the World Intelligent Connected Vehicle Conference , Wang Zhiqing, member of the Party Leadership Group and chief planner of the Ministry of Transport, proposed three major directions ...[Details]
Author(s):
Dave Weisberg - Cal-Bay Systems
Industry:
Biotechnology
Products:
LabVIEW, Signal Conditioning, PXI/CompactPCI
The Challenge:
Provide a medical device manu...[Details]
The opcode of the instruction contains the address of a working register (Rn: R0-R7), and the operand is stored in the register, such as:
MOV A, R5; A←(R5)
This instruction sends the content of R...[Details]
The current probe is a wire that connects the circuit under test and the input end of the electronic oscilloscope. A complex probe is composed of a resistor-capacitor component and an active device...[Details]
"Neo5S" is the name of the latest member of the iQOO Neo family, which was officially released tonight. Compared with the special products made for Double 11, iQOO Neo5S is obviously more suitable...[Details]
1 Introduction In most cases, the vibration measurement of vehicles needs to be carried out on the road. First, a tape recorder is needed to record the vibration signal of the test, and then the te...[Details]
According to foreign media reports, Tesla has been quietly providing two-way charging capabilities for the Model 3 and possibly the Model Y, and this feature may bring great changes in the future. ...[Details]
On the eve of the two sessions, the National Development and Reform Commission, the National Energy Administration and the Ministry of Industry and Information Technology jointly issued the "Guidin...[Details]
On November 4, the reporter learned from Hefei Power Supply Company that the functional application of Hefei's virtual power plant platform is constantly deepening. By vigorously expanding access reso...[Details]