85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Keyence vision camera communicates with Siemens 1500 PLC
Implementing grab correction with robotsTable of contents
1.Functions realized and application occasions2.
2Controller Panel Introduction2
3Sof...
[i=s]This post was last edited by littleshrimp on 2021-2-28 18:21[/i]Through the previous posts, we have a general understanding of the Standard C driver and read_data_polling of ST sensors. Next, I w...
littleshrimpST Sensors & Low Power Wireless Technology Forum
The iTOP-STM32MP157 development board is a multi-core heterogeneous processor based on STMicroelectronics' ST ARM dual Cortex-A7 cores and a single Cortex-M4 core. The Cortex-A7 core provides support ...
Live Topic: Microchip Live | Secure Boot and Message Authentication for CAN FD in ADAS and IVI Systems Using TA100-VAOContent Introduction: Microchip experts delved into the needs and requirements for...
The C2000 Piccolo LaunchPad with InstaSPIN-FOC is an inexpensive evaluation platform designed to help you get started with sensorless motor control using the InstaSPIN-FOC solution. The LaunchPad is b...
[i=s]This post was last edited by lansebuluo on 2022-10-24 12:29[/i]I placed the order on the 19th and it arrived on the 22nd via SF Express, which was very fast.
I bought a MOS driver chip, and its p...
Quality standards and product requirements are now so high that they make a complete renewal of testing technology absolutely necessary and drive the end of conservative practices. Increasingly precis...[Details]
In recent years, with the rapid development of digital signal processing technology, digital signal processing technology has been widely used in various fields. Therefore, the performance of analog...[Details]
1 Introduction
With the increase of switching frequency and power density, the electromagnetic environment inside the switching power supply is becoming more and more complex. Its electromag...[Details]
First of all, what is FSK? FSK (Frequency-Shift keying) is translated into Chinese as frequency shift keying, which uses the frequency change of the carrier to transmit digital information.
FSK can ...[Details]
1. What is the difference between the continuous output power and the peak output power of a power inverter?
Continuous power and peak power differ in the meaning they express.
Continuous...[Details]
Introduction: In this issue of electrical knowledge, we will introduce in detail the usage and precautions of common instruments, so that everyone can master the relevant knowledge more quickly. 1....[Details]
On April 11, Sunwoda Energy Storage released a new upgraded NoahX2.0 liquid-cooled energy storage system equipped with self-developed 314Ah battery cells.
A brand new upgrade that lives ...[Details]
TSMC today officially announced that it will invest $12 billion to build an advanced wafer fab in Arizona, USA. This news not only breaks TSMC’s previous response that it has no specific plans to bui...[Details]
Recently, OSRAM and Austrian sensor and chip expert ams have held constructive negotiations on a business merger agreement and other topics. The discussions began on August 13, German time, and are o...[Details]
On August 30, Beijing Junzheng released its 2021 semi-annual report showing that revenue in the first half of the year was 2.336 billion yuan, a year-on-year increase of 558.46%; net profit was 355 m...[Details]
China Energy Storage Network:
Some people say that she is the "all-round doctor" of the digital power grid, with the unique abilities of "clairvoyance" and "super hearing" in three-dimensio...[Details]
Use the microcontroller AT89S51 and ADC0809 to design a digital voltmeter, which can measure the DC voltage value between 0-5V and have a four-digit digital display, but requires the minimum number o...[Details]
In the multiple data transfer (STM, LDM) of ARM instructions, it is mentioned that the Load and Store instructions of multiple registers are divided into 2 groups: A set of data storage and reading, ...[Details]
It is often assumed that components of electric vehicles would be state-of-the-art, and charging barriers are no exception. After all, charging a car is a frequent, daily necessity. Charging operat...[Details]
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
