TNPW e3
Vishay
High Stability Thin Film Flat Chip Resistor
≤
0.05 % (1000 h rated power at 70 °C)
FEATURES
•
Superior moisture resistivity
≤
0.25 % (85 °C;
56 days; 85 % RH)
•
Lead (Pb)-free solder contacts, RoHS compliant
•
AEC-Q200 compliant (sizes 0402 to 1206)
•
Low temperature coefficient and tight tolerances
(± 0.1 %; ± 10 ppm/K)
•
Waste gas resistant
RoHS
COMPLIANT
APPLICATIONS
TNPW e3 Precision Thin Film Flat Chip Resistors are the
perfect choice for most fields of modern electronics where
highest reliability and stability is of major concern. Typical
applications include automotive, telecommunication,
industrial, medical equipment, precision test and measuring
equipment.
•
•
•
•
•
•
Test and measuring equipment
Telecommunication
Medical equipment
Industrial equipment
Instrumentation
Automotive
STANDARD ELECTRICAL SPECIFICATIONS
DESCRIPTION
Metric size
Resistance range
Resistance tolerance
Temperature
coefficent
Climatic category
(LCT/UCT/days)
Rated dissipation,
P
70 (2)
Operating voltage,
U
max.
AC/DC
Maximum permissible
film temperature
Thermal resistance
(3)
Max. resistance
change at
P
70
;
ΔR/R
1000 h
8000 h
225 000 h
Insulation voltage:
U
ins
1 min
Continuous
FIT
observed
Weight/1000 pieces
75 V
75 V
≤
0.1 x 10
-9
/h
0.65 g
100 V
75 V
≤
0.1 x 10
-9
/h
2g
200 V
75 V
5.5 g
300 V
75 V
10 g
300 V
75 V
≤
0.1 x 10
-9
/h
16 g
300 V
75 V
≤
0.1 x 10
-9
/h
28 g
300 V
75 V
≤
0.1 x 10
-9
/h
39 g
55/125/56
0.063 W
50 V
155 °C
870 K/W
TNPW0402
RR 1005M
TNPW0603
RR 1608M
TNPW0805
RR 2012M
TNPW1206
RR 3216M
TNPW1210
(1)
RR 3225M
TNPW2010
RR 5025M
TNPW2512
(1)
RR 6332M
10
Ω
to 100 kΩ 10
Ω
to 332 kΩ 10
Ω
to 1 MΩ 10
Ω
to 2 MΩ 10
Ω
to 3.01 MΩ 10
Ω
to 4.99 MΩ 10
Ω
to 8.87 MΩ
± 1 %; ± 0.5 %; ± 0.1 %
± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
55/125/56
0.1 W
75 V
155 °C
550 K/W
55/125/56
0.125 W
150 V
155 °C
440 K/W
55/125/56
0.25 W
200 V
155 °C
220 K/W
55/125/56
0.33 W
200 V
155 °C
170 K/W
± 50 ppm/K; ± 25 ppm/K
55/125/56
0.4 W
300 V
155 °C
140 K/W
55/125/56
0.5 W
300 V
155 °C
110 K/W
10
Ω
to 100 kΩ 10
Ω
to 332 kΩ 10
Ω
to 1 MΩ 10
Ω
to 2 MΩ 10
Ω
to 3.01 MΩ 10
Ω
to 4.99 MΩ 10
Ω
to 8.87 MΩ
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.05 %
≤
0.10 %
≤
0.30 %
≤
0.1 x 10
-9
/h
≤
0.1 x 10
-9
/h
Notes
(1)
Size not specified in EN 140401-801
(2)
Rated voltage
P
x
R
. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat
flow support of the printed-circuit board (thermal resistance). Using advanced temperature level may require special considerations towards
the choice of circuit board and solder material. The rated dissipation applies only if the permitted film temperature is not exceeded.
(3)
Measuring conditions in accordance with EN 140401-801
• TNPW 0402 without marking
Document Number: 28758
Revision: 30-Sep-08
For technical questions, contact: filmresistors.thinfilmchip@vishay.com
www.vishay.com
1
TNPW e3
High Stability Thin Film Flat Chip Resistor
≤
0.05 % (1000 h rated power at 70 °C)
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE
TCR
± 50 ppm/K
TNPW1210
TOLERANCE
±1%
± 0.5 %
± 0.1 %
±1%
± 0.5 %
± 0.1 %
± 0.1 %
± 0.1 %
±1%
± 0.5 %
± 0.1 %
±1%
± 0.5 %
± 0.1 %
±1%
± 0.5 %
± 0.1 %
±1%
± 0.5 %
± 0.1 %
RESISTANCE VALUE
10R to 3M01
10R to 3M01
47R to 2M13
10R to 3M01
10R to 3M01
47R to 2M13
10R to 4M99
10R to 4M99
47R to 1M0
10R to 4M99
10R to 4M99
47R to 1M0
10R to 8M87
10R to 8M87
47R to 1M0
10R to 8M87
10R to 8M87
47R to 1M0
E-SERIES
24 to 96
24 to 192
24 to 96
24 to 192
24 to 96
24 to 192
24 to 96
24 to 192
24 to 96
24 to 192
24 to 96
24 to 192
Vishay
± 25 ppm/K
± 15 ppm/K
± 10 ppm/K
± 50 ppm/K
TNPW2010
± 25 ppm/K
± 50 ppm/K
TNPW2512
± 25 ppm/K
PART NUMBER AND PRODUCT DESCRIPTION
Products can be ordered using either the Product Description or the Part Number.
For ordering TNPW with SnPb contacts please refer to latest edition of data sheet TNPW lead bearing.
PART NUMBER: (LEAD (Pb)-FREE) TNPW12061K32DEEA
T
MODEL
N
P
W
VALUE
1
2
0
6
1
K
3
TCR
2
D
E
E
A
SPECIAL
Up to 2 digits
Blank
= Standard
TOLERANCE
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
PACKAGING
(1)
EA
EC
ED
EF
EG
EN
EY
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210
TNPW2010
TNPW2512
R
= Decimal
K
= Thousand
M
= Million
(4 digits)
H
= ± 50 ppm/K
E
= ± 25 ppm/K
X
= ± 15 ppm/K
Y
= ± 10 ppm/K
PRODUCT DESCRIPTION: TNPW1206 1K32 0.5 % T-9 ET1 e3
TNPW1206
MODEL
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210
TNPW2010
TNPW2512
1K32
RESISTANCE
VALUE
Examples:
54R1
= 54.1
Ω
1K32
= 1320
Ω
0.5 %
TOLERANCE
±
0.1
%
±
0.5
%
±
1.0
%
T-9
TCR
T-2
= ± 50 ppm/K
T-9
= ± 25 ppm/K
T-10
= ± 15 ppm/K
T-13
= ± 10 ppm/K
ET1
PACKAGING
(1)
ET1
ET6
ET7
E02
E67
E52
E75
e3
LEAD (Pb)-FREE
e3
= Pure Tin
Termination Finish
Note
(1)
Please refer to PACKAGING table
Document Number: 28758
Revision: 30-Sep-08
For technical questions, contact: filmresistors.thinfilmchip@vishay.com
www.vishay.com
3
TNPW e3
Vishay
High Stability Thin Film Flat Chip Resistor
≤
0.05 % (1000 h rated power at 70 °C)
PACKAGING
MODEL
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210
TNPW0603
TNPW0805
TNPW1206
TNPW1210
TNPW0603
TNPW0805
TNPW1206
TNPW1210
TNPW2010
TNPW2512
TAPE WIDTH
[mm]
8
8
PITCH
[mm]
2
4
REEL DIAMETER
[mm/inch]
180/7
180/7
PIECES PER
REEL
10 000
1000
PACKAGING
CODE FOR
PRODUCT
DESCRIPTION
ET7
E52
(1)
PACKAGING
CODE FOR PART
NUMBER
ED
EN
(1)
TYPE OF
CARRIER TAPE
Paper
Paper
8
4
180/7
5000
ET1
EA
Paper
8
4
330/13
20 000
1000
4000
1000
2000
ET6
E75
E02
E75
E67
EC
EY
EF
EY
EG
Paper
Blister
Blister
Blister
Blister
12
12
4
4
180/7
180/7
Note
(1)
E52/EN only for precision resistors with tolerance ± 0.1 % and temperature coefficient
≤
± 25 ppm/K
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
AI
2
O
3
ceramic substrate and conditioned to achieve the
desired temperature coefficient. Specially designed inner
contacts are deposited on both sides. A special laser is used
to achieve the target value by smoothly fine trimming the
resistive layer without damaging the ceramics. A further
conditioning is applied in order to stabilize the trimming
result. The resistor elements are covered by a protective
coating designed for electrical, mechanical and climatic
protection. The terminations receive a final pure tin on nickel
plating. The result of the determined production is verified by
an extensive testing procedure on 100 % of the individual
chip resistors. This includes pulse load screening for the
elimination of products with a potential risk of early life
failures according to EN 140401-801, 2.1.2.2. Only accepted
products are laid directly into the tape in accordance with
EN
60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1.
Excellent solderability is proven, even after
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions. The suitability of conformal coatings, if applied,
shall be qualified by appropriate means to ensure the
long-term stability of the whole system. The resistors are
RoHS compliant, the puretin plating provides compatibility
with lead (Pb)-free and lead-containing soldering processes.
The immunity of the plating against tin whisker growth has
been proven under extensive testing.
All products comply with the
GADSL
(2)
and the
CEFIC-EECA-EICTA
(3)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
• 2002/95/EC Restriction of the
Substances Directive (RoHS)
use
of
Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
Notes
(2)
(3)
Global Automotive Declarable Substance List, see www.gadsl.org
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org
→
issue
→
environment policy
→
chemicals
→
chemicals for electronics
For technical questions, contact: filmresistors.thinfilmchip@vishay.com
Document Number: 28758
Revision: 30-Sep-08
www.vishay.com
4
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
