CXOQ1BSNSM3-40.0M,100/20/-/I datasheet, PDF

Datasheet> All Categories > Passive components> oscillator> CXOQ1BSNSM3-40.0M,100/20/-/I

CXOQ1BSNSM3-40.0M,100/20/-/I: DescriptionCMOS Output Clock Oscillator, 40MHz Nom,; CategoryPassive components oscillator; File Size5MB，3 Pages; ManufacturerSTATEK CORPORATION; Websitehttp://www.statek.com/

Download Datasheet Parametric View All

CXOQ1BSNSM3-40.0M,100/20/-/I Overview

CMOS Output Clock Oscillator, 40MHz Nom,

CXOQ1BSNSM3-40.0M,100/20/-/I Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	145144753931
Reach Compliance Code	unknown
maximum descent time	6 ns
Frequency Adjustment - Mechanical	NO
frequency stability	20%
Installation features	SURFACE MOUNT
Number of terminals	4
Nominal operating frequency	40 MHz
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Oscillator type	CMOS
Output load	15 pF
Package body material	CERAMIC
physical size	2.6mm x 2.1mm x 1.22mm
longest rise time	6 ns
Maximum supply voltage	1.98 V
Minimum supply voltage	1.62 V
Nominal supply voltage	1.8 V
surface mount	YES
maximum symmetry	55/45 %

CXOQ1BSNSM3-40.0M,100/20/-/I Preview

CXOQ/CXOQHG OSCI LLATOR

16 kHz to 100 MHz

Surface Mount Quartz Crystal Oscillator

DESCRIPTION

Ultra-miniature, high performance quartz crystal

oscillator designed and manufactured for high-reliability

applications.

FEATURES

PACKAGE DIMENSIONS

2.5 x 2.0 mm hermetically sealed ceramic package

High shock resistance (HG version) up to 75,000 g

Low acceleration sensitivity

Low power consumption

Fast start-up time

Full military testing available

IBIS model available

Designed and manufactured in the USA

APPLICATIONS

TOP

BOTTOM

DIM

Termination

TYPICAL

inches

0.098

0.079

2.50

2.00

0.89

1.02

0.67

0.57

MAXIMUM

inches

0.102

0.083

0.039

0.048

0.027

0.023

2.60

2.10

1.00

1.22

0.69

0.59

Medical

Test & Diagnostic Equipment

Handheld Devices

Patient Monitoring Devices

Defense and Aerospace

Communications

Navigation

GPS

Industrial

Miniature Clock Requirements

Handheld Instrumentation

Transponder/Animal Migration

PACKAGING OPTIONS

SM1

SM3/SM5

0.035

0.040

0.026

0.022

PIN CONNECTIONS

Output Enable/Disable (E) or no connection (N)

Ground (Connected to Lid)

Output

VDD

SUGGESTED LAND PATTERN

Tray Pack

Tape and Reel (per EIA 481). See Tape and Reel

datasheet 10109.

10190 Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

SPECIFICATIONS

Specifications are typical at 25°C unless otherwise noted. Specifications are subject to change without notice. Tighter specifications

available.

Frequency1

Supply Voltage

Calibration Tolerance2

Frequency-Temperature Stability3,4

32.768 kHz

1.8V to 5.0V ± 10%

400 kHz to 100 MHz

1.8V to 5.0V ± 10%

±100 ppm to ±25 ppm

±50 ppm to ±10 ppm (Commercial)

±100 ppm to ±20 ppm (Industrial)

±100 ppm to ±30 ppm (Military)

1.8V

0.115

3.3V

0.125

15 pF

1 MAX

14 MAX

45% MIN 55% MAX

3 ppm MAX

STD: 5,000 g, 0.3 ms, 1/2 sine

HG: 75,000 g, 0.5 ms, 1/2 sine

20 g, 10-2,000 Hz swept sine

-10°C to +70°C (Commercial)

-40°C to +85°C (Industrial)

-55°C to +125°C (Military)

-55°C to +125°C

260°C for 20 seconds

-0.3V to 7.0V

-0.5V to 7.0V

5 MAX

6 MAX

24 MHz

32 MHz

50 MHz

1.8V

1.5

2.0

3.0

3.3V

3.0

6.0

Typical Supply Current (mA)

Output Load (CMOS)5

Start-up Time (ms)

Rise/Fall Time (ns)6

Duty Cycle

Aging, First Year

Shock Survival

Vibration Survival7

Operating Temperature Range4

Storage Temperature Range4

Max Process Temperature

Max Supply Voltage VDD8

Moisture Sensitivity Level (MSL)

This product is hermetically sealed and is not moisture sensitive.

1. Not all frequencies available at all voltages. Contact factory.

2. Tighter tolerances available.

3. Does not include calibration tolerance. Tighter tolerances available.

4. Broader temperature ranges available. Contact factory.

5. Higher CMOS loads and TTL loads available. Contact factory.

6. Maximum rise/fall time for 32.768 kHz @ 3.3V. Contact factory for rise/fall time at other voltages.

7. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.

8. The supply voltage is -0.5V to 4.0V for some frequencies. Contact factory.

ENABLE/DISABLE OPTION E

FUNCTION TABLE

ENABLE/DISABLE OPTIONS (E/N)

Statek offers two enable/disable options: E and N. The

E-version has a Tri-State output and stops oscillating

internally when the output is put into the high Z state. The

N-version does not have PIN 1 connected internally and

so has no enable/disable capability. The following table

describes the Enable/Disable option E.

Enable (Pin 1 High*) Disable (Pin 1 Low)

Output

Oscillator

Current

Frequency Output

Oscillates

Normal

High Z State

Stops

Very Low

*When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.

10190 Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

PHASE NOISE AND JITTER PERFORMANCE AT 25 MHZ AND 40 MHZ

Typical Phase Noise (dBc/Hz) (3.3V

)

Frequency Offset

[Hz]

10 Hz

100 Hz

1 kHz

10 kHz

100 kHz

1 MHz

5 MHz

Clock Frequency (MHz)

25 MHz

-89

-118

-142

-154

-156

-159

-163

40 MHz

-66

-101

-134

-153

-160

-161

-163

Integrated RMS Jitter (12 kHz to 20 MHz)1

Frequency

25 MHz

40 MHz

VDD = 3.3V

200 femtoseconds

1. Upper integration frequency point is clock frequency dependent.

Period Jitter (Typical) 10,000 cycles (3.3V)

Frequency

25 MHz

40 MHz

RMS

1.2 picoseconds

Peak to Peak

9.5 picoseconds

1.3 picoseconds 10.0 picoseconds

HOW TO ORDER STATEK CXOQ/CXOQHG OSCILLATORS

CXOQ

SM3

—

32.0M

Frequency

K = kHz

M = MHz

100

—

High Shock

HG = High Shock

Blank = Standard

Special

Enable/Disable

Blank = Standard

Option

= Special or E = Enable/Disable

Custom

N = No Connection

Shock Level

Code

Blank = 5,000 g

= 10,000 g

= 20,000 g

= 30,000 g

= 50,000 g

= 75,000 g

Frequency

Calibration

Tolerance Stability over

Temp. Range

@ 25

(in ppm)

Operating Temp. Range

C = -10

C to +70

= -40

C to +85

M = -55

C to +125

S = Customer Specified

Supply

Voltage

1 = 1.8 V

2 = 2.5 V

3 = 3.0 V

4 = 3.3 V

5 = 5.0 V

Terminations

Blank = Gold Plated (Lead Free)

SM3 = Solder (60/40 Sn-Pb)

SM5 = Solder (Lead Free)

200

Total

Frequency

Tolerance

(in ppm)

Operating Temp. Range

C = -10

C to +70

= -40

C to +85

M = -55

C to +125

S = Customer Specified

10190 Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

More (Only the first 5 pages are displayed. Please Download Datasheet to view the full content.) >

Recommended Resources

Bridge rectifier circuit diagram and current reversal

Electronic power saving mousetrap circuit

CXA1034P,M power amplifier circuit diagram

Countermeasures against external interference in general frequency converters (1)

On-site signal optical fiber transmission and reception circuit

Computer motherboard circuit diagram 820 1_36

1500-5 common Chinese characters strokes and pronunciation: I think this thing could be helpful for children to learn to read. For example, you could make a handheld device with an electronic ink screen that can play the strokes and pronunciation by selecting ...; littleshrimp Talking

Unveiling the secrets of NB-IoT modules DRX, eDRX, and PSM (Part 1): One of the development trends of the Internet of Things is LPWAN (Low Power Wide Area Internet of Things) represented by NB-IoT technology. In this application scenario, the terminal is mainly powered...; 中移模组 Wireless Connectivity

Isn't it great to use LT's 3090 as a constant current source? Let's discuss how to set the current.: Isn't it great to use LT's 3090 as a constant current source? Let's discuss how to set the current....; 秋天的琴湖 Analog electronics

NC2-51 MCU Learning Board Experimental Program Example 1: NC2-51 MCU Learning Board Experimental Program Example 51 MCU learning board finished product picture NS-1 download line finished product picture Programming functions: 　The NC2-51 single-chip microco...; rain 51mcu

About the development process of the transmission control unit TCU: I have just started to learn about the Transmission Control Unit (TCU), and there are many things I don't understand. For example, the development process of TCU, the software needed, and the testing ...; 李钧佳 Automotive Electronics

Control System Design Guide (4th Edition): The book "Control System Design Guide (Original Book 4th Edition)" is divided into three parts, with a total of 19 chapters. Part I (Chapter 1 to Chapter 10): Application Principles of Control. It int...; arui1999 Download Centre

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components