# 3D Printer Controller Project## Project Introduction A project based on the open source 3D printer system Smoothieware V2.0 ported to STM32F7508-DK. The hardware uses STM32F7508-DK as the main contr...
Jump game based on RVB2601
Author: w494143467Project Background
Based on the RVB2601 development board of Pingtou Ge , I am mainly familiar with the RISC-V kernel, but in the application layer develop...
[i=s]This post was last edited by ddllxxrr on 2019-6-20 06:02[/i]Received the board!!!
The packaging is very strict, and I filtered it several times, for fear of missing out on something good.I looked...
DSP real-time multi-task operating system has been widely used abroad, but in China, people have been reluctant to accept the concept of DSP-based operating system, and are often troubled by the basic...
[i=s]This post was last edited by arilink on 2022-5-14 17:04[/i]LVGL stands for Light and Versatile Graphics Library. It is a free, open-source GUI library with exquisite interface, low resource consu...
This article explains how to use the human body sensing module HC SR505. We use an LED to indicate whether a person has walked into the sensor. When a person walks in, the LED indicator lights up, and...