-
On November 18, the IPO of Honeycomb Energy Technology Co., Ltd. (hereinafter referred to as Honeycomb Energy) on the Science and Technology Innovation Board was accepted by the Shanghai Stock Exchang...[Details]
-
Different applications require different design parameters. System size, efficiency, flexibility and external component count must be considered to suit the end purpose.
Small size is importan...[Details]
-
In order to create an energy-saving and efficient smart lighting system, the use of MCU and dimmable drivers for environmental sensing and high-efficiency dimming has become a popular design trend in...[Details]
-
I2C, a two-wire serial bus (SCL and SDA) developed by PHILIIPS, is a commonly used communication protocol, mostly used to connect microprocessors and their peripheral chips. Features of I2C: 1. Sim...[Details]
-
Abstract:
Aiming at the shortcomings of traditional vehicle load detection system, a capacitive vehicle load detection system is proposed. The load detection sensor of this system adopts di...[Details]
-
Direct measurement method for measuring DC voltage Set the Y-axis input coupling switch to the "ground" position and the trigger mode switch to the "automatic" position so that the screen displ...[Details]
-
The companion gaming industry may be threatened by robots. A recent application from the U.S. Patent Office shows that Sony is preparing to launch a physical robot that can express corresponding emot...[Details]
-
Power controlled servo hand with a glove and DIY flex!
This project uses budget items and DIY parts to create a fully functional robotic hand that can be controlled via a glove with flexible s...[Details]
-
1. Introduction
The multi-physiological parameter monitoring system is used to conduct continuous, long-term, automatic and real-time monitoring of the patient's physiological or biochemical p...[Details]
-
A voltage
supervisor is an
integrated circuit
that can be used to reset the processor in low voltage conditions to prevent processor malfunction and ensure safe system power-do...[Details]
-
There is a program that is fixed in the STC microcontroller when it leaves the factory. The function of this program is to detect whether the serial port needs to download the program. If not, the use...[Details]
-
1 System Design
Radio frequency identification technology (RFID) has been widely used in many fields such as industrial automation, commercial automation, and transportation control and managem...[Details]
-
Despite their potential to transform cities and make roads safer, self-driving cars may take decades longer to become mainstream than hyped. There are many reasons for this, including technical, regu...[Details]
-
/*
Jumper setting: default jumper position, note that the buzzer selection jumper J5 should be selected at terminal 23
Program effect: Use the timer/counter of the microcontroller to design...[Details]
-
High-voltage solid-state soft start cabinet is a device used for high-voltage motor starting. It controls the on and off of thyristors to achieve soft starting and soft stopping of motors, thereby ...[Details]
Recruitment
京公网安备 11010802033920号
EEWORLD