SSW20B2701CS7

First write the IE register interrupt enable register, then write the interrupt handling function After an interrupt is triggered in timing mode, the values ​​of TH and TL will be reset to 0 by de...[Details]

The result of the cooperation between the microcontroller development team and the compiler developers is that the generated code is more efficient and has better performance. This article describes ...[Details]

An oscilloscope is an indispensable instrument when we check hardware circuits. We need to set some parameters when using an oscilloscope, such as the scale of the oscilloscope, the trigger mode, etc...[Details]

TI launches new 3D Hall-effect position sensor, combining high speed and high accuracy for faster real-time control TI sensors deliver ultra-high accuracy at up to 20kSPS and reduc...[Details]

As in other areas of the electronics industry, in the field of design automation, many technologies and methodologies have been widely accepted through standardization. For example, the standardizatio...[Details]

On March 5, 2019, the Prime Minister proposed in his work report: The current 16% tax rate for manufacturing and other industries will be reduced to 13%; the current 10% tax rate for transport...[Details]

　　The bus interface of MAX1166 is 8-bit. The interface speed of this bus is quite fast and can directly interface with various microprocessors. Therefore, the connection circuit between MAX1166 and 8...[Details]

hardware design Code design #include "MAIN.H" #include "LCD1602.h" #include "PCF8591.h" unsigned char code FFW_X ={0x01,0x03,0x02,0x06,0x04,0x0c,0x08,0x09}; //X reverse order unsigned char code...[Details]

Project case operation: This case is about connecting the data of Danfoss inverter to Siemens 1200PLC through Netess' Modbus to Profinet gateway device. The devices used are a Siemens 1200PLC,...[Details]

First, you need to understand JTAG.    JTAG Protocol  JTAG (Joint Test Action Group) is an international standard test protocol (IEEE 1149.1 compatible), mainly used for internal chip testing. Mos...[Details]

　　The moisture meter is an instrument that can detect the moisture content in various organic and inorganic solids, liquids, gases and other samples, while the rapid moisture meter is a new type of r...[Details]

Schottky diodes are made by depositing a metal layer on a thin epitaxial layer of N-type silicon, using the contact barrier between the metal and the semiconductor to achieve unidirectional conduct...[Details]

1. Differences between analog and digital TV channel power In analog TV broadcasting, the peak power level is used to characterize the strength of the channel signal. When measuring the power level o...[Details]

Common Mode Semiconductor introduces the high-performance low-dropout linear regulated power supply GM1205, which uses an ultra-low noise and ultra-high power supply rejection ratio (PSRR) archit...[Details]

According to foreign media reports, automotive electronics supplier REDTIGER announced the launch of the F77 dash cam, redefining video clarity and safety standards for drivers. The F77 is equipped...[Details]