-
In March 2013, there were many news events related to light-emitting diodes (LEDs). This was not accidental. In fact, it was the result of the industry's joint efforts over the years and the breakthr...[Details]
-
For non-ARM microcontrollers, a timer can also be used to implement a function similar to ARM's systick: blocking delay. void timerX_configYsIT(void) { /*Set the base duration*/ /*Timer disa...[Details]
-
According to news on August 30, foreign media ascii.jp recently conducted an interview with Pat Stover, Intel’s senior director of technology development, and William Grimm, director and vice preside...[Details]
-
To popularize LED lamps, it is necessary not only to significantly reduce costs, but also to solve technical problems. Doug Bailey, Vice President of Marketing at Power Integrations, shared his exp...[Details]
-
Learning Siemens PLC is not as difficult as you think. It can be summarized in one sentence: for beginners, it is enough to roughly grasp the hardware composition, programming software, system inst...[Details]
-
Speech recognition technology is a technology that allows machines to convert speech signals into text through recognition, and then convert them into instructions through understanding. The purpos...[Details]
-
introduction Among the PIC series microcontrollers, only the PIC18 series and PIC16F87X series microcontrollers have the IAP function and can use the BootLoader function. The following only intro...[Details]
-
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited filter
#define A 10
char value;
char filter()...[Details]
-
Differences between autonomous driving L1-L5 technologies
According to the SAE international autonomous driving standards, autonomous driving technology is divided into different levels, from ...[Details]
-
Event will demonstrate how the latest devices can reduce development time and costs, enabling solutions to be brought to market faster May 25, 2022 - ON Semiconductor , a leader in smart power and ...[Details]
-
Introduction The oscilloscope is a fundamental instrument for electrical engineers, but I often find that some engineers fail to use its triggering function effectively. Triggering is often consi...[Details]
-
The method I saw on the STC official website is to back up the UV2.CDB or UV3.CDB file under the KEIL installation directory (in the folder UV2 or UV3), and then replace it with the CDB file ...[Details]
-
Since the introduction of single-chip microcomputers into my country in the 1980s, the craze for learning and applying single-chip microcomputers has never diminished, especially the MCS51 series. ...[Details]
-
The basic principle of infrared photography is actually the same as general photography. Both use light to shine on objects and reflect through the lens to form an image in the camera. The only diffe...[Details]
-
Add nand.o to the Makefile, and then create a new nand.c to implement the read operation of NandFlash.
There are two ways to read NandFlash:
Read by page (need to provide page addres...[Details]