TCXO Specification
Part No. + Packaging:
LFTCXO070034Bulk
Description
The IQXT-260-12 employs an analogue ASIC for the oscillator
and a high-order temperature compensation circuit in a 2.5 x
2.0mm size package.
Model
IQXT-260-12
Model Issue number
1
Frequency Parameters
Frequency
Frequency Tolerance
Tolerance Condition
Frequency Stability
26.0MHz
±1.00ppm
@ 25°C ±2°C
±
0.50ppm
Operating Temperature Range
-40.00 to 85.00°C
Ageing
±3ppm max over 3yrs @ 25°C
Frequency Stability: TA varied over operating temperature
range, measurement referenced to frequency observed with
Fref=(Fmax+Fmin)/2, Vs=1.88V and load=10kΩ//10pF.
Frequency Slope (minimum of one frequency reading every
2°C):
-30 to 85°C: 0.1ppm/°C max
-40 to -30°C: 0.5ppm/°C max
Static Temperature Hysteresis (frequency change after
reciprocal temperature ramped over the operating range -
frequency measured before and after @ 25°C): 0.6ppm max
Supply Voltage Variation (±5% change @ 25°C): ±0.1ppm max
Load Variation (±10% change @ 25°C): ±0.2ppm max
Reflow Variation (after two consecutive reflows as per profile
shown and 1hr recovery @ 25°C): ±1ppm max
Note: Parts should be shielded from drafts causing unexpected
thermal gradients. Temperature changes due to ambient air
currents can lead to short term frequency drift.
Electrical Parameters
Outline (mm)
1.88V nominal
Supply Voltage
Current Draw
2.00mA
Supply Voltage Range: 1.75V min to 2V max
Supply Current (@ TA=25°C, Vs max and load=10kΩ//10pF):
2mA max
Output Details
Pb-Free Reflow
Clipped Sine
Output Compatability
Drive Capability
10kΩ//10pF ±10%
Output Voltage Level (@ TA=25°C, Vs min and
load=10kΩ//10pF): 0.8V pk-pk min
Start Up Time (amplitude within 90% of specified output level):
0.5ms max
Start Up Time (frequency within ±0.5ppm of steady state
frequency): 1.5ms max
Output: DC coupled
Note: AC-coupled output requires an external capacitor,
≥1nF
recommended.
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1 408.273.4530
Email: info@iqdfrequencyproducts.com
Web: www.iqdfrequencyproducts.com
Page 1 of 2
TCXO Specification
Part No. + Packaging:
LFTCXO070034Bulk
Output Control
Power Down Mode:
Logic '0' (20%Vs max) to pad 1 disables oscillator output.
Logic '1' (80%Vs min) to pad 1 enables oscillator output.
Stand-by Current: <0.01μA typ, 1μA max
Start Up Time (amplitude within 90% of specified output level):
0.5ms max
Start Up Time (frequency within ±0.5ppm of steady state
frequency): 1.5ms max
Noise Parameters
Phase Noise @ 25°C (typ):
-64dBc/Hz @ 1Hz
-93dBc/Hz @ 10Hz
-115dBc/Hz @ 100Hz
-135dBc/Hz @ 1kHz
-149dBc/Hz @ 10kHz
-150dBc/Hz @ 100kHz
Environmental Parameters
Storage Temperature Range: -40 to 85°C
Shock: MIL-STD-202 M213: Half sine wave acceleration of
3000G peak amplitude, duration 0.3ms, velocity 12.3ft/s.
Vibration: JESD22-B103-B: 10G peak acceleration for 20mins,
12 cycles in each of the 3 orientations, tested from
10-2000Hz.
Moisture Resistance: MIL-STD-202 M106g: 1000hrs @ 85°C,
85% RH, biased.
Thermal Cycling: JESD22 Method JA-104C: 1000 temperature
cycles, where each cycle consists of a 25mins soak time @
-40°C followed by a 25mins soak time @ 85°C, with a 60secs
maximum transition time between temperatures, air to air
transition.
Note: Frequency shift
≤1ppm
after environmental conditions.
Manufacturing Details
Maximum Process Temperature: 260°C (40secs max)
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Packaging Details
Compliant
Compliant
Not Applicable
Pack Style: Bulk
Pack Size: 1
Bulk pack
Alternative packing option available
Sales Office Contact Details:
UK: +44 (0)1460 270200
Germany: 0800 1808 443
France: 0800 901 383
USA: +1 408.273.4530
Email: info@iqdfrequencyproducts.com
Web: www.iqdfrequencyproducts.com
Page 2 of 2
Printed on 10 Dec 15 10:27 using Part Data Sheet V1.00014