85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
With the upgrade of micropython, the community has also updated the PYBCN_V2 and PYBNANO_V2 firmware. Please go to the firmware section to download the update. [list] [*][b]github [/b][url=https://git...
Using C++ to write an IIR filter
We first need to design an IIR filter in MATLAB and generate a header file that reflects the frequency response characteristics of the IIR filter.Theoretical support
I...
Working principle of 51 MCU timer interrupt Working principle of ultrasonic sensor, timing diagram, distance calculation Relationship between ultrasonic sound speed and temperature Display distance th...
Kickstarter is crowdfunding a micro:bit bipedal robot, which is very interesting.[img=600,600]http://www.micropython.org.cn/bbs/data/attachment/forum/201812/11/093321osmv9vvivduvhvzs.jpg[/img] [img=60...
Dear friends, why does my AD19 only show the wireframe after copper laying, but not the laid copper, as shown in the picture? Is there any setting? Switch to AD10 and open it, double-click the copper ...
This article discusses the method of using MSP430F5xxx to implement real-time HDLC encoding and decoding in the ETC system. MSP430F5xxx is the latest product series of TI's MSP430 family. It uses adva...
LED
is a characteristic-sensitive
semiconductor
device with negative temperature characteristics. Therefore, it needs to be stabilized and protected during application, which gives...[Details]
PID looks very advanced and you may be fooled by it at first, and then by the formula. As most people don't know advanced mathematics or have forgotten it, they are scared to death when they see th...[Details]
One of the most exciting moments in an engineering design project is when the hardware is first moved into the lab ready to begin integration testing. This phase of the development process can ofte...[Details]
The hydraulic pump is the core component of the hydraulic transmission system. It is responsible for converting mechanical energy into liquid pressure energy and providing power for the entire syst...[Details]
China Energy Storage Network:
As of February 22, the cumulative amount of electricity delivered by "Xinjiang Power Delivery" reached 503.7 billion kWh, creating more than 120 billion yuan i...[Details]
Introduction
The spectrum analysis method based on FFT can extract useful information from signals containing noise, and has important application value in the data processing of instruments and met...[Details]
In order to make it more convenient for users to use their phones, mobile phone manufacturers often set up comprehensive and detailed functions at the system level to enrich users' needs for mo...[Details]
The production of high-power (W-level power) white light LEDs, with the continuous improvement of blue light LED chip technology and the emergence of new packaging materials, its packaging technology ...[Details]
The concept of interruption When the CPU is processing an event A, another event B occurs, requiring the CPU to process it quickly (an interrupt occurs); The CPU suspends the current work and switche...[Details]
With the rapid development of IC manufacturing technology, system on chip (SOC) is widely used in ASIC design. Microprocessor IP core is the core part of SOC system on chip. However, most companies a...[Details]
Certara Launches New Synchrogenix™ Writer Software to Accelerate Regulatory Approval Process
Cloud-based, proven regulatory software helps automate and improve the quality of patient...[Details]
Musk and his SpaceX (Space Exploration Company) have been all over the news. People who know Tesla and Musk have been praising them on social networks, and even feel that it is incredible and unrea...[Details]
GMSL is Maxim's automotive SERDES bus for high-performance cameras and high-definition video connections, which can be transmitted on both coaxial and shielded twisted pair cables.
For automoti...[Details]
1. Introduction of infrared remote control: Infrared remote control is a wireless, non-contact control technology with significant advantages such as strong anti-interference ability, reliable info...[Details]
On October 29, the Korea Economic Daily stated that according to the latest Samsung semiconductor memory roadmap it has, Samsung Electronics will launch the next-generation V-NAND with more than 40...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
