Y002440K7000C0L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y002440K7000C0L

Y002440K7000C0L: DescriptionFixed Resistor, Metal Foil, 0.3W, 40700ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 4216,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Y002440K7000C0L Overview

Fixed Resistor, Metal Foil, 0.3W, 40700ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 4216,

Y002440K7000C0L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	851318672
Reach Compliance Code	compliant
ECCN code	EAR99
structure	Hermetically Sealed
Lead diameter	0.64 mm
Lead length	25.4 mm
lead spacing	3.81 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package height	10.92 mm
Package length	10.54 mm
Package form	Radial
Package width	4.11 mm
method of packing	Bulk
Rated power dissipation(P)	0.3 W
resistance	40700 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
size code	4216
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Tolerance	0.25%
Operating Voltage	300 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

DC/DC converter regulator circuit 02

Negative 10V precision voltage reference circuit diagram

250mA high-speed buffer BUF634 circuit diagram

Digital duty cycle meter circuit

TMP47C433AN (television) microprocessor

Count left pulse width multiplier

The gap between actual power supply and ideal power supply: [size=5](1) There is a gap between the characteristics of actual power supply devices and ideal power supply: [/size] [size=5]Response speed: As mentioned earlier, linear regulated power supply achiev...; 灞波儿奔 Analogue and Mixed Signal

Is it possible for the LDO or DCDC output voltage to be lower than the internal reference voltage?: Generally, the output voltage of the regulator is divided by a resistor and compared with the internal reference voltage. Thereby adjusting the output voltage to reach the desired voltage value. Howev...; sfcsdc Analog electronics

Okay, let’s talk about the Internet of Things technology protocol: The Internet of Things communication protocols can be roughly divided into two categories, one is the access protocol and the other is the communication protocol. The access protocol is generally resp...; Aguilera RF/Wirelessly

On-line debugging method for embedded processors: In FPGA design, embedded processor soft cores (such as MicroBlaze, PicoBlaze, etc.) are used to form a programmable system on chip (SOPC). Compared with ASIC, it has better modifiability and maintaina...; 灞波儿奔 DSP and ARM Processors

PCB issues for switching power supplies: I see that many switching power supply PCBs are two-layer, why not four or more layers?...; S3S4S5S6 Analog electronics

[Zero-knowledge ESP8266 tutorial] Quick start 21 world clock demo: Last time I shared a local clock, but my friend thought it was not fashionable, so after thinking about it, I decided to make a world clock to support the scene, which can be regarded as a small expan...; roc2 stm32/stm8

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components