[size=4]Author: TI Engineer Kevin Zhang[/size] [size=4] [/size] [size=4] When the output of a DCDC power supply needs to pass through a long cable to reach the load, the voltage drop caused by the imp...
[size=4] 1) Configure the McBSP0 of VC5509A in clock stop mode. At this time, CLKX is used as the SCK signal, FSX is used as the SS signal, CLKR is internally connected to CLKX, and FSR is internally ...
Thank you for having you +EEWORLDI have been associated with EEWORLD for many years, and I can say that eeworld has helped me a lot. Technology is developing rapidly, and new products and technologies...
Microelectronics and Microlithography Technology : https://training.eeworld.com.cn/course/4552Microlithography and micro/nano processing technology, the foundation of microelectronics technology, are ...
1. Objective This time we will run the motor and observe several key variables of FOC control: Ia, Ib, Ic, Ialpha, Ibeta, Id, Iq, and voltages Vd and Vq. [/size][/font][/b][/align][align=left][b][font...
Serial port printout before Neptune is burned:1. Burn the firmware using SecureCRT:Use the " SecureCRT " tool to burn the firmware, double-click: " SecureCRTPortable.exe ", as shown below:When you ope...