-
The frequency characteristics are measured by frequency sweeping. The frequency sweeping signal is generated by AD9851, which can generate a sine wave with pure spectrum, wide frequency range and very...[Details]
-
According to a report by Taiwan’s Economic Daily on March 2, Yuichi Horita, president of JASM, a subsidiary of TSMC responsible for the Kumamoto plant in Japan, said in a local speech that the new pl...[Details]
-
1. Company The PIC microcontroller is a product of Microchip, which was first developed in 1989. 2. Reduced instruction set technology Traditional MCUs use a complex instruction set (CISC) stru...[Details]
-
On June 18, the Shanghai Stock Exchange officially accepted the application for listing on the Science and Technology Innovation Board of Shanghai Hollewo Electronic Systems Technology Co., Ltd. (her...[Details]
-
Challenge: Reduce characterization time for increasingly complex wireless power amplifiers (PAs) without sacrificing measurement accuracy or increasing device cost. Solution: Using NI LabVIEW softwa...[Details]
-
Taking the measurement of the coaxiality between the microscope objective optical axis and the objective thread axis as an example, the photoelectric readout principle of the instrument is explained....[Details]
-
Atomic fluorescence spectrometry (AFS) is a new type of spectral analysis technology proposed and developed in the mid-1960s. It is a spectral analysis technology between atomic emission spectrometr...[Details]
-
If an EDS (R) is replaced, its data set will be compared with the current project after a restart (hard disk and RDC).
The consistency check revealed that the (non-existent) data differed from...[Details]
-
1. Make a minimum system board: If you have never done ARM development, it is recommended that you do not be greedy and complete all applications at the beginning, because the startup method of ARM is...[Details]
-
New energy storage and source-grid-load-storage integration have become an important task for Guangxi to build a new power system. In order to promote the construction of new energy storage and source...[Details]
-
The liquid level can be easily measured by using a pressure or differential pressure transmitter, and it can output a standard air pressure signal or current signal. For an open container whose uppe...[Details]
-
When using digital integrated circuits, current pull output and current sink output are very important concepts. For example, when using an inverter for output display, the output terminal is high to ...[Details]
-
1. Interrupt function concept In the previous lecture, when IT0 is assigned a value of 1, P3.2 encounters a falling edge and IE0 is set to 1. To automatically clear IE0, we can just reference the in...[Details]
-
With the continuous development of the video surveillance industry, manufacturers need to continuously improve their light environment response technology to address monitoring issues in low-li...[Details]
-
Given an unknown location placed in an unknown environment, is there a way for the robot to gradually map out a complete map of the environment while deciding in which direction the robot should go...[Details]