Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[i=s]This post was last edited by Knight on the Sun on 2022-7-21 00:48[/i]1. RW007 Introduction
RW007 is a SPI/UART high-speed wifi module based on Cortex-M4 WIFI SOC developed by Shanghai Ruiside Ele...
The picture is a curve chart of MMBT3904. There are 4 questions as follows:
1. What does the "Base-Emitter Saturation Voltage" in the figure mean? How is it different from the base-emitter voltage dro...
In a single-ended flyback switching power supply, the primary input of the transformer is a DC voltage, and the secondary output is also a DC voltage.
How is the input DC converted into AC through the...
Figure 1 is the circuit in use, but because the external input terminal is in high impedance state when there is no input, it is sometimes unstable. I want to connect a 50K resistor directly between p...
For those who like to use KiCad, the new version Kicad5.1.6 is released
Manually enter the address to the official website to download
The KiCad project is proud to announce the latest stable release ...
1. Features of the PIC16C62× series of microcontrollers The PIC16C62× series is a RISC reduced instruction, Harvard structure bus, and 18-pin microcontroller. It has the characteristics of low pow...[Details]
How to quickly judge the performance of electrolytic capacitors? Common faults of electrolytic capacitors include capacity reduction, capacity disappearance, breakdown short circuit and leakage. The ...[Details]
In 2018, charging piles and P2P were two "deep pits" in the capital market. Who would have thought that two years later, the new energy vehicle industry is being "cared for" by policies. After being ...[Details]
01. Overview of product standards related to intelligent connected and autonomous vehicles As we all know, the global automotive industry and technology have been showing a trend of accelerating de...[Details]
On November 26, Shanghai Belling’s official Weibo account announced that the company has launched a 16Mbps high-speed 485 chip. With the rapid development of communication, industrial control, smart...[Details]
Knorr-Bremse is committed to advancing highly automated driving (HAD) technology in the truck industry. As a professional leader in its market segment, Knorr-Bremse mainly provides advanced redunda...[Details]
Israel’s StoreDot, an innovator in Extremely Fast Charging (XFC) battery technology for electric vehicles, has unveiled its strategic technology roadmap, called 100inX, which will see t...[Details]
According to LetsGoDigital, on October 28, Huawei Technologies Co., Ltd. applied for the "Huawei S-Tag" trademark to the European Union Intellectual Property Office (EUIPO). IT Home learned ...[Details]
On March 23, Gasgoo learned from ZF officials that it will launch the next-generation "ProAI" supercomputer globally for the first time at this year's Shanghai Auto Show to meet the needs of software...[Details]
With
the development and maturity of
computer
technology and communication technology,
data communication
has become a widely used communication method. It uses communication sy...[Details]
For a long time, current transformers have been used as a standard device in instruments and equipment to measure precision current. Even in harsh environments and high temperature conditions, this d...[Details]
The commonly used MCS51 and PIC series microcontrollers usually have only one (or no) UART asynchronous serial communication interface. If multiple serial interfaces are required in the application...[Details]
India's smartphone exports more than doubled to more than $11 billion in the fiscal year ended in March, underscoring the South Asian market's emergence as a global hardware manufacturing hub, accord...[Details]
Application of mathematics in industrial controller design
The design of industrial controllers involves many aspects, including hardware design, software design, system architecture...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
