85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
A small text editor that can run on pyboard, ESP8266, written entirely in python. [list] [*] Micropython version that uses sys.stdin.read() and sys.stdout.write() for input and output. [*] Changed the...
108M Wireless Broadband Router TL-WR641G Product Overview: TL-WR641G 108M Wireless Broadband Router integrates wired/wireless network connection, and is designed to meet the Internet access needs ...
#includemsp430f5529.h?unsigned?int?mode_flag=0xffff;void??Init_PWM_Driver()?//?Initialize the motor drive circuit{???P4DIR?|=BIT0+BIT1+BIT2+BIT3;?//IN1~IN4???P2DIR?|=BIT0+BIT1;//Reuse p2.0 as the enab...
[size=7][color=#ff0000]1. Domestic 750W tube core. [/color][/size][size=6][color=#ff0000]The domestic gold wire jumper feels whitish[/color][/size] [size=6][color=#008000]Second, the following is the ...
Facing the congested intersections in the city and the endless convoys of cars, do you miss the free and unfettered roads in your hometown? Have you ever watched the green light turn red at the inters...
In April 2017, I bought a Xiaofang smart camera on Xiaomi's official website. The model is iSC5. It has been in a broken state for the past year. I have flashed the firmware three times, but it still ...
1. Introduction
Linux was originally developed by Linus Torvalds, a student at the University of Helsinki in Sweden, in 1991. Later, with the support of GNU, Linux has achieved tremendous deve...[Details]
Recently, the whistleblower Slashleaks exposed a real Xiaomi MIX4. From the exposed pictures, Xiaomi Mi MIX 4 adopts a curved screen design, and the frame is very narrow, even the width of the chin...[Details]
Recently, I have been doing CAN field bus experiments on the STM32 experimental board. I have only done serial communication on STC51 before. In comparison, I found that CAN bus is quite complicated. ...[Details]
Introduction to
tape retention testing equipment The tape retention tester is mainly used to test the anti-adhesion property of the sample, the adhesion holding property of the pressure-sensit...[Details]
0 Introduction
With the continuous improvement of computer hardware, especially CPU main frequency, the efficiency of audio and video encoding based on software is getting higher and highe...[Details]
It was previously revealed that Qualcomm SM8450 will no longer be called Snapdragon 898, but will be named Snapdragon 8 gen1, and MediaTek has renamed the "Dimensity 2000" chip and officially r...[Details]
When mass-producing and debugging equipment in actual projects, the author found that the same version of the program had inconsistent effects when running on different devices. Some devices had ...[Details]
First, the simulation interface and menu bar are introduced. Menu bar View options There is no limit on the number of STM8 software breakpoints, but the interrupt cannot be set in the interrupt ...[Details]
1 Introduction
In recent years, with the rapid development of medical technology, nuclear magnetic resonance (NMR) has been widely used in large and medium-sized hospitals. At present, in the p...[Details]
0 Introduction For pulverized coal transportation using high-dense phase conveying technology, accurate measurement of pulverized coal flow is of great significance to gas consumption, smooth operati...[Details]
Baud rate setting related parameters In the CAN bottom layer protocol, each bit time (TBit) of CAN data is divided into many time periods (Tscl), which include: A. Bit synchronization time (Tsync) ...[Details]
1. Introduction
High-power LED packaging has been a research hotspot in recent years due to its complex structure and process, and directly affects the performance and life of LEDs. In particu...[Details]
A few days ago, a netizen talked about implementing SPI communication through FPGA. Through the replies to the post, I found that many netizens are still confused about SPI communication, so today I w...[Details]
By Michelle Tate, Product Marketing Manager, Keysight Technologies
In the field of engineering, accuracy is the core element. Whether it is performing quality and performance testi...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
