85°C ± 2°C, 85%±5%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle
85°C ± 2°C, 3000 hours, 1.5 hr ON, 0.5 hr OFF cycle
+155°C, 1000 hours
* Depends on resistance value, please contact KOA Speer for details.
Precautions for Use
• The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts
absorb on the top tapes to cause a failure in the mounting and the parts are destructed by static electricity (1J, 2A, 2B, 2E: 1kV and more, 1E: 0.5kV and more at Human
Body Model 100pF, 1.5kΩ) to change the resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged
on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards.
• Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc.
The flux may contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na? ), chlorine (Cl−) etc. Therefore these
kinds of ionic substances may induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since
lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that
the adhesiveness gets stronger due to the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant
masking tape is unavoidable, please make sure that the adhesives on the tape do not directly come in contact with the product.
●
When high-pressure shower cleaning is implemented, there is a possibility of exfoliation of the top electrodes caused by the water pressure stress so please avoid
the implementation.
●
If the implementation is unavoidable, then please evaluate the products beforehand.
For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
9/30/19
28
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
I bought Teacher Xia Yuwen's "Verilog Digital System Design Tutorial" (4th Edition)There is an example on page 114. I tried to do this experiment but it didn't work.
The code is:
`timescale 10ns/1ns
m...
I saw a project called ch2601_webplayer on CDK and decided to give it a try. I downloaded the project to my hard drive and started experimenting.At first, I created a project based on the operation of...
[i=s]This post was last edited by qwqwqw2088 on 2019-2-26 11:02[/i] Why is the CPU so difficult to make? If you magnify the inside of the CPU 10,000 times, you will be amazed< [flash]http://player.you...
[i=s]This post was last edited by Beifang on 2022-1-8 20:58[/i]1. First of all, thank you for the opportunity to participate in the creative modification competition . I mainly want to understand how ...
Project Background
Lightning disasters have existed since ancient times. According to relevant research statistics, there are an average of more than 2,000 lightning strikes on Earth at an...[Details]
When many people talk about MCU development, they often focus on a certain chip. In fact, this is a very irrational approach. The chip is just a tool, and the method is fundamental. When doing a proje...[Details]
On October 8, Samsung Electronics released its unaudited third-quarter earnings report, predicting a 58% surge in operating profit to $10.6 billion. Analysts believe that Samsung Electronics' third-q...[Details]
How can I put it? We are good at what we do, so we can neither starve nor die. I have been working for four or five years, so I would like to share some of my experience. I have been working in P...[Details]
At present, there are more and more leaks about Huawei P40 series mobile phones. Recently, a blogger posted a comparison picture of Huawei P30 Pro/P40 Pro packaging boxes. Judging from ...[Details]
The trend towards autonomous driving, coupled with public concerns about the safety of driverless cars, has made cybersecurity a top concern for automotive original equipment manufacturers (OEMs).
...[Details]
Giving orders has never been so easy.
We know that after mastering the language and images in the real world, the big model will eventually enter the real world, and "embodiment" should be the...[Details]
Switching characteristics are one of the most important characteristics of power semiconductor switching devices , which are represented by the driving voltage, terminal voltage, and terminal current...[Details]
introduction With the rapid development of information technology, especially in the field of microprocessors, the number of integrated transistors inside microprocessors has increased dramatically,...[Details]
AD6620 is a broadband IF to baseband demodulator. Its internal signal processing unit consists of four series units. They are frequency conversion unit, second-order fixed coefficient comb filter deci...[Details]
At present, a large number of mid- and low-end embedded applications mainly use 8/16-bit microcontrollers. In China, due to historical reasons, there are many different types of microcontrollers base...[Details]
Preface Steps to use STM8's built-in bootloader First, confirm whether the STM8 you are using has its own bootloader. Refer to the table below STM8 empty devices can directly use their own boot...[Details]
Required hardware: 51 microcontroller, ESP8266 (wifi module), DS18b20 (temperature sensor) Required software: You need to download a network debugging assistant on your mobile phone, which is includ...[Details]
The edge of an image is the intersection between regions with different attributes of the image, and it is also the place where the regional attributes suddenly change. The edge of an image contain...[Details]
In the previous section, we talked about how to implement the tasklet mechanism
http://blog.csdn.NET/morixinguan/article/details/69666935
In this section, we will implement th...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
