85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Background knowledgeIn FPGA digital image processing, row cache is used very frequently. For example, when we need to operate the image matrix, we need to cache it. For example, image mean filtering, ...
I was busy with the automotive ECU test project some time ago, and finally finished it today. I haven't handed in my homework for a long time, so today I took out the development board to test the CAN...
Nowadays, the size of power modules is getting smaller and smaller, the power density is getting higher and higher, and the working environment of the modules is getting worse and worse. Its high and ...
[i=s]This post was last edited by donatello1996 on 2018-12-24 09:21[/i] [size=5] All the functions related to operating images in the Linux system can be directly implemented through the libjpeg libra...
1 Introduction
China is one of the countries with the poorest per capita water resources in the world. However, in my country, water shortage and serious waste have long coexisted. The nex...[Details]
According to China Business News, Michael, global head of Merck's display materials business, said that Merck invested 12 million euros in Shanghai to double the size of its OLED materials technology...[Details]
Power supply
is an important part that all electrical appliances must have. In
the
electronic
equipment industry, people compare the power module to the "heart" of electronic e...[Details]
On November 8, Tongfu Microelectronics announced that the company's shareholder, National Integrated Circuit Industry Investment Fund Co., Ltd., reduced its holdings of the company's shares by 26.580...[Details]
AT89C51 microcontroller is a low-voltage, high-performance CMOS 8-bit microcontroller produced by ATMEL Corporation of the United States. It has rich internal resources: 4kB flash memory, 128BRAM, 32...[Details]
On October 16, at Lenovo's 2024 annual global innovation event Tech World today, Lenovo Group launched the sixth-generation vertical liquid cooling product ThinkSystem N1380 Neptune to power genera...[Details]
With the popularity of LED display screens and the reduction of costs, LED display screens have become an important tool for information dissemination in public places. At present, the main methods fo...[Details]
When the megohmmeter is working, it generates high voltage, and the object to be measured is electrical equipment, so it must be used correctly, otherwise it will cause personal or equipment accidents...[Details]
This paper introduces a MEMS-based tunable dispersion compensator and describes its working principle in detail, which can be used to achieve true multi-channel dispersion compensation.
Disper...[Details]
On the banks of Suzhou River in Shanghai, the undergrounding, wire removal and pole pulling operations of the overhead lines on Wanhangdu Road are proceeding in an orderly manner. Despite the grand...[Details]
You may have noticed that there is a new interface with a lightning logo next to the mini DP interface on the side of the MacBook Pro released by Apple. Yes, this is the Thunderbolt technology newly ...[Details]
Driven by the rapid development of advanced driver assistance systems (ADAS) and autonomous driving technology, modern cars are equipped with a large number of sensors, such as cameras, radars, LiDAR...[Details]
1. Experimental task
: Display "★", "●" and heart-shaped images on the 8X8 dot matrix LED. Use the buttons to select the image to be displayed.
2. Circuit diagram
Figure 4.26.1
3. Ha...[Details]
1 Introduction
The advantages of copper metallization in high-power automotive applications are low on-state resistance and repeatable clamping robustness. However, stress from thick Cu layers is a...[Details]
Whether it is MOSFET, IGBT, SiC MOSFET, or GaN HEMT, each power device requires a corresponding gate driver IC. A suitable driver IC can simplify the complexity of your system design and save R&D t...[Details]
Altera SoC
京公网安备 11010802033920号
EEWORLD
