85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
[size=4] 1. Memory Mode [/size] [size=4] The TMS320C2X/C5X fixed-point processor has two types of memory: program memory and data memory. The program memory mainly contains executable program code, wh...
Six manufacturers won the bid for China Mobile's mobile phone customization, and domestic brands were absent again 2006-6-13On June 12, people familiar with the matter revealed that China Mobile has r...
This reference design demonstrates the high-precision use of the TMP117 high-accuracy digital temperature sensor and the CC2640R2F wireless MCU. This user guide provides design guidance for skin tempe...
HI
I would like to ask how the voltage of C1 is kept constant, and whether there is any good analysis method for the charging and discharging problems of a circuit with two capacitors like this?
cheer...
[b]MY-IMX6-EK140P Linux-4.1.15 Test Manual[/b] From Mingyuan Zhirui's wiki Directory [[url=http://wiki.myzr.com.cn/index.php?title=MY-IMX6-EK140P_Linux-4.1.15_%E6%B5%8B%E8%AF%95%E6%89%8B%E5%86%8C#][co...
Live replay: HARTING - How to quickly and cost-effectively install cables in electrical control cabinets : https://training.eeworld.com.cn/course/67824...
LED is now known as the fourth generation of light sources. High-power LED has many advantages over traditional light sources in outdoor lighting.
1 LED lamps have high light efficiency
C...[Details]
0 Introduction
In modern radar receivers, the most widely used structure is the superheterodyne structure. In this structure, the single-chip system often requires an off-chip filter to re...[Details]
EPS emergency power supply is a power supply system developed from UPS power supply . It is also a relatively economical and ideal emergency power supply developed in recent years. EPS emergency ...[Details]
On August 29, the 24th Chengdu International Auto Show opened. Honeycomb Energy held a press conference at the show, announcing that the world's first cobalt-free battery pack it developed was offici...[Details]
Air conditioner short circuit is a common fault that usually leads to circuit interruption and damage to electrical equipment. When the air conditioner short circuits, it is necessary to promptly i...[Details]
LCD and CRT monitors use different display devices, which determines that their working principles are qualitatively different. The figure shows the structural schematic diagram of the TIT liquid c...[Details]
HiPhi , the pure electric brand under Human Horizons, recently announced that its first electric car, HiPhi X , will be equipped with the world's first evolvable customizable digital lighting s...[Details]
When FPGA was first created, it only contained 64 logic modules and 85,000 transistors, with no more than 1,000 gates. Today, the number of transistors exceeds 1 billion, and the number of gates h...[Details]
Interrupt concept What is an interrupt When the CPU is processing an event A, another event B occurs, requiring the CPU to process it quickly (an interrupt occurs); The CPU temporarily interrupts the...[Details]
IEC (International Electrotechnical Commission) is one of the most authoritative international electrotechnical standardization organizations that develops international safety standards for electroni...[Details]
1. The general timers of STM32F107 are: TIM2, TIM3, TIM4, TIM5, 2. The modes of the general timers (TIM2, TIM3, TIM4, TIM5) of STM32F107 include up counting, down counting and center alignment mode...[Details]
0 Introduction
DNC (Distributed Numerical Control) is a way to integrate CNC machine tools in the workshop with the upper control computer to realize centralized control and management of processi...[Details]
Apple this week announced its App Store Best of 2020 winners, recognizing 15 apps released over the year. For the first time, the winners now have physical prizes, and over the past few days, several...[Details]
Background
GL Logger (hereinafter referred to as GL) is a special automotive data recorder, which is widely used in road tests or bench tests. This series of recorders supports data recording o...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
