-
As the JESD204 interface is increasingly adopted by data converters, there is a pressing need to focus on its performance and optimize the digital interface. The focus should not be solely on the per...[Details]
-
1. Circuit structure
The following figure is a CMOS hearing aid circuit diagram. After the NOT gates D1, D2, and D3 are connected in series, they form a small signal AC amplifier with R2, R3, RP1...[Details]
-
Causes of fire in generator slip ring
(1) During the operation of the unit, although the same type of carbon brushes are used, the contact resistance between the carbon brush and the slip ring...[Details]
-
The self- programmability of Flash
means that the Flash memory can be erased/programmed using the resident software or program in the Flash memory, but the storage area where the program code...[Details]
-
Since Tesla was localized, the price has been dropping, which has made many old car owners dissatisfied. However, it now seems that the previous price reduction is not the bottom, and the price of do...[Details]
-
Tower cranes are mainly developed for the formwork technology in building construction and are suitable for the lifting and hoisting of building materials and components in industrial and civil con...[Details]
-
HMD Global launched the Nokia 2.4 and Nokia 3.4 in September this year. This cost-effective smartphone offers some interesting features such as multi-camera setup, good battery life, etc. The company...[Details]
-
PIC (Peripheral Interface Controller) is an integrated circuit (IC) used to control peripheral devices. It is a CPU with decentralized (multi-tasking) functions. Compared with humans, the brain is th...[Details]
-
1 Introduction
Many devices now have high requirements for real-time clocks. The integrated real-time clocks on the chip often only pay attention to their convenience of use, but do not conside...[Details]
-
Also known as a three-purpose meter, it is a multi-range, multi-purpose instrument that can be used to measure AC and DC voltage, DC current and resistance. Some can also measure AC current, inductan...[Details]
-
1 Introduction
In CNC machine tools, manual operation panels are always indispensable. Their characteristics are: 1. Some input quantities are mutually exclusive, and misoperation is not allowe...[Details]
-
Wearables, like nearly every other technology, require energy. Fortunately, though, energy is actually everywhere within the modest power budget of wearables. It's in sunlight and radio waves, in t...[Details]
-
1. AVR microcontrollers use RISC architecture, while 8051 microcontrollers use CISC architecture. The former is 2 to 4 times faster than the latter, and is a pipeline operation instruction. 2. AVR m...[Details]
-
FlexRay has begun to show its strength in automotive electronic applications for single-channel high-speed power transmission, driver assistance and comfort enhancement. In the new BMW X5 car, Flex...[Details]
-
Automotive chip grade
According to the automotive electronics standards set by the United States, automotive chips are divided into five levels, the smaller the number, the higher the level.
...[Details]