• 100% pure matte tin-plated termination finish allowing for
excellent solderability
• SnPb termination finish option available upon request
(5% Pb minimum)
Applications
Typical applications include military, space quality and high reliability electronics.
Packaging C-Spec Ordering Options Table (100% Matte Sn and SnPb Terminations)
Packaging Type
1
Bulk Bag/Unmarked
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
“Bulk Bag” packaging option is not available for Gold (Au) termination finish options and case sizes larger than 2225 (5664 Metric).
2
“Waffle Tray” packaging option is not available for case sizes larger than 2225 (5664 Metric).
3
The terms “Marked” and “Unmarked” pertain to laser marking option of components. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices.
3
Reeling quantities are dependent upon chip size and thickness dimension. When ordering using the “T1K0” packaging option, 1812 through 2225 case
size devices with chip thickness of ≥ 1.9 mm (nominal) may be shipped on multiple 7” reels or a single 13” reel. Additional reeling or packaging options
may be available. Contact KEMET for details.
4
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
5
Moisture sensitive packaging is required for Gold (Au) termination option “E” (1.97 – 11.8 µin)
6
Additional reeling or packaging options may be available. Contact KEMET for details.
Next are the 3 evaluation reports:
(1) https://en.eeworld.com/bbs/thread-1214040-1-1.html
(2) https://en.eeworld.com/bbs/thread-1214570-1-1.html
(3) https://en.eeworld.com/bbs/thread-1215784-1-1.htmlI...
Some experience we have accumulated when debugging a system using Keil C 1. Since Keil C does not support Chinese very well , the displayed cursor will be inconsistent with the actual cursor position,...
[Power Amplifier Application Case] How to use a power amplifier to drive a capacitive load?The customer requires a frequency of two hz, a square wave waveform, a high voltage of 0-1000v, and a low vol...
[i=s]This post was last edited by dql2016 on 2021-6-28 20:07[/i]Bluetooth broadcast can only send data in one direction and the data can be received by any other device. It is not possible to realize ...
dql2016onsemi and Avnet IoT Innovation Design Competition
Author: Wang Huidong, member of the YiBo Technology Expressway Team
"The design of this PCB optical positioning point is like autumn, which makes me feel refreshed."Zhao Ligong, who was sighing about ...
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
