85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
In the process of making circuit boards, ink is needed to be printed on the solder mask and text to meet the functional requirements of the circuit boards. Let's first introduce the brands of commonly...
First of all, I would like to thank the forum platform for providing us with such good resources. I haven't participated in forum activities for a long time. This time I happened to be making a small ...
Sensor nodes are required to work for a long time. Frequent replacement of batteries is time-consuming, laborious, and impractical in many situations. They cannot be charged as frequently as portable ...
The animation explains the working principles of various motors in detail, including: three-phase induction motor, servo motor, single-phase induction motor, variable frequency drive working principle...
Research Analysis:A total of 30 questionnaires were received , and 22 valid questionnaires were answered as required .From the age distribution point of view:35-40 years old : 4 people; 30-35 years ol...
Recently, Qorvo announced the launch of a new generation of multi-time programmable power management IC (PMIC), which is optimized for high performance and compact design. Everyone knows that Qorvo's ...
Abstract: Most electronics practitioners are familiar with "watchdog", which is a technical means to prevent computer programs from entering an infinite loop and jumping out. This article will show y...[Details]
DC/DC module power supply is increasingly widely used in the fields of communication, network, industrial control, railway, military, etc. due to its small size, excellent performance and convenient ...[Details]
The inverter is equipped with a braking resistor mainly to consume part of the energy on the DC bus capacitor through the braking resistor to avoid the capacitor voltage being too high. Theoretical...[Details]
In the new year of Gengzi, the new coronavirus epidemic ravaged China. While countless white-coat warriors, PLA officers and volunteers are fighting on the front line against the epidemic and prote...[Details]
TDK Corporation (TSE:6762) announced that it has successfully developed a 4K smart glasses full-color laser control device using lithium niobate (LiNbO3) thin film technology. The device will be un...[Details]
According to foreign media reports, on August 24 local time, the US Patent and Trademark Office granted Apple several Titan project patents, which involve a complex and mature vehicle lighting system...[Details]
Abstract: This paper introduces the implementation process of an electronic password lock successfully simulated by Protues software. It uses the highly reliable STC89C52 single-chip microcomputer ...[Details]
0. Introduction
Fans are general-purpose machines, which are widely used in various sectors of the national economy. Fans are widely used in ventilation, dust removal and cool...[Details]
IT Home reported on January 9 that according to foreign media tomshardware, storage/network equipment manufacturer Qnap launched the industry's first four-bay NAS host with two Thunderbolt 4 in...[Details]
At present, Chuzhou is in a critical period of growth with strong momentum and great potential. The whole city is conscientiously implementing the spirit of the Fifth Plenary Session of the 11th Provi...[Details]
January 5, 2023, Dongguan, China - Avnet, the world's leading technology distributor and solution provider, and Hong Kong Science and Technology Parks Corporation (HKSTP) jointly announced the iDM2 E...[Details]
Stuttgart, Germany – Automated parking can ease the pressure at airports. Bosch, Mercedes-Benz and parking garage operator Apcoa want to introduce unmanned, fully automated parking at Stuttgart Airpo...[Details]
Amplifier Outputs and EMI/RFI
In addition to filtering the input and supply pins, the amplifier outputs also need to be protected from EMI/RFI, especially when driving long cables that act as ...[Details]
Today, no one doubts that cloud computing is one of the most mainstream enterprise IT infrastructures. At the 2019 Hangzhou Yunqi Conference, Alibaba Cloud officially released the third-generation se...[Details]
Translated from - spectrum, Michael Koziol Machine learning classifiers can target hackers before they strike. Hackers often steal IP addresses to steal data and launch attacks, and the additiona...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
