85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
In the previous post, I failed to connect to IBM Watson Quickstart due to poor network when I posted the screenshot. This time I finally connected it, and I am posting now to make up for it.
This time...
After studying other BLE products, I found that many BLE devices include Device Inforamtion service, which contains information such as device manufacturer, device software and hardware version, produ...
[i=s]This post was last edited by hehung on 2022-2-19 16:24[/i]For previous posts, please refer to:【GD32L233C-START Review】1. Unboxing
[GD32L233C-START Review] 2. Create a new project step by step
[GD...
[i=s]This post was last edited by MianQi on 2021-10-16 12:15[/i]Reference examples - ST U5 development board evaluation and programming related issues (official sharing)First, if you want to use STM32...
Now it is possible to send data from the computer to the microcontroller via ch340 to serial port, and the microcontroller communicates via serial port and sends data to another computer via ch9328. S...
The first program starts with flashing lights. Before programming, you need to install the development software, including IDE and compiler (you can refer to this post: https://en.eeworld.com/bbs/thre...
On May 22, the Shanghai Regulatory Bureau disclosed Haitong Securities’ summary report on its guidance work for ACM Semiconductor Equipment (Shanghai) Co., Ltd. According to the disclosure, Haiton...[Details]
On August 17, Jucan Optoelectronics released its 2021 semi-annual report. The announcement showed that the company achieved operating income of 961 million yuan in the first half of this year, a year...[Details]
The selection structure is equivalent to the conditional statement in text language. The new Diagram Disable Structure in LabVIEW 8 is
Conditional Disabled Structure is similar to the conditional m...[Details]
introduction
Line turnout
Electronic detection ruler
is an important guarantee for train operation safety. Its main purpose is to measure the track gauge and levelness of the trac...[Details]
On August 31, the Henan Provincial Government held a meeting to promote economic operations, analyze and judge the current economic situation, and arrange and deploy the next key economic work. Govern...[Details]
FPGA is the abbreviation of field programmable gate array. It has both the high integration and versatility of gate array devices and the flexibility of programmable logic devices. The control of m...[Details]
U.S. President Trump announced at the weekend that he would ease restrictions on Huawei, which led to a rebound in technology stocks that have been affected by the executive order since May. However,...[Details]
As the number of medium power (1W to 4W) LED string applications increases, the demand for compact, high efficiency, high performance LED drivers has also increased. The LT3519 LED driver meets t...[Details]
The Internet of Things (IoT) shows no signs of fads, with more and more connected things expected to appear regularly over the next decade. This is not surprising, as we continue to imagine new ways ...[Details]
BYD, DJI: We unite!
On January 16, BYD officially announced its strategic cooperation with DJI and will release the world's first vehicle-integrated vehicle-mounted
drone
system. I...[Details]
introduction
In recent years, with the rapid advancement of urbanization in my country, people's living environment has been greatly improved, and there are more and more valuable items in the h...[Details]
From today on, I officially started to learn the development of tiny4412. Today, I mainly looked at the startup process and memory mapping of Tiny4412 and the Exynos4412 data sheet, and wrote a marqu...[Details]
In May 2019, Google I/O announced the new mid-range Pixel 3a and Pixel 3a XL. These products are affordable versions of the Pixel 3, with slightly lower hardware specifications, but the 3.5mm headpho...[Details]
This article describes the construction of a bass-reinforced speaker box system that can be used to reproduce music with a heavy bass effect that can be adjusted with a potentiometer.
Mo...[Details]
For high-performance field-oriented control systems, speed closed loop is essential. Speed closed loop requires real-time motor speed. Currently, speed feedback is mostly detected by photoelectri...[Details]
ST MEMS Sensor Creative Design Competition
京公网安备 11010802033920号
EEWORLD
