-
On April 27, BusinessKorea quoted JPMorgan Chase as saying that Samsung Electronics may seek to acquire a semiconductor company that operates a fab in the United States, and targets may include NXP, ...[Details]
-
1. Contactless card reading principle This series of articles mainly discusses ID cards in the 125KHz frequency band. IC cards in the 13.5MHz frequency band are not within the scope of this article. ...[Details]
-
5G has become an important productivity tool that has profoundly changed human society. In particular, the millimeter wave frequency band, as an important component of 5G, has become increasingly imp...[Details]
-
Lack of sleep, distraction, and not wearing seat belts can all have serious consequences for the safety of drivers and passengers. To avoid dangerous driving and possible road accidents, future vehic...[Details]
-
5G, artificial intelligence (AI) and other technologies are constantly being updated and iterated, giving the healthcare field the "wings" to take off intelligently. The evolution from function to in...[Details]
-
China Energy Storage Network:
"The digital transformation of the energy industry will be the biggest change we will see in the next decade." Steve Birz, GE's global senior vice president and ...[Details]
-
If the load current Io is reduced, the input current Ii is also reduced accordingly. Without considering the loss of the converter, U. I. =UiIi. When I. is small to a certain value, the minimum value...[Details]
-
With the development of society and the prosperity of economy, modern science and technology are being applied more and more widely. Using modern high-tech means and perimeter anti-theft alarm syst...[Details]
-
After Foxconn founder Terry Gou stepped down to the second line, Foxconn's management system was changed to be operated by a nine-member team. Foxconn Vice President Lu Fangming said that the operati...[Details]
-
1. Experimental principle: The I2C bus is a simple, bidirectional, two-wire synchronous serial bus developed by Philips. It only requires two wires to transmit information between devices connected...[Details]
-
When the DTL logic circuit outputs "1", Q1 is turned on, no current flows through the light-emitting diode, Q2 is turned off, and relay K1 does not act. When the DTL outputs "0", Q1 is turned off, cu...[Details]
-
1. Check the transformer for any obvious abnormalities by observing its appearance, such as whether the coil lead is broken or desoldering, whether the insulating material has burnt marks, whether ...[Details]
-
(1) The default setting of msp430 is to disable interrupt nesting, unless you enable the general interrupt EINT again in an interrupt routine.
(2) When entering the interrupt program, as long as the ...[Details]
-
If you want to make a good LED lighting product, you must know the most critical parts, which are light distribution, structure, and electronics. Light distribution, structure, and electronics are ...[Details]
-
The press overload protection device is an important device used to protect the press from damage during operation. It can monitor the working status of the press in real time. When the press is ab...[Details]