Features
“Termination” option)
n
Custom circuits available per factory
n
RoHS compliant* (see How to Order
For information on thin film applications,
download Bourns’ Thin Film Application Note.
This series is currently available but
not recommended for new designs.
4100T - Thin Film Molded DIP
Product Characteristics
Resistance Range .......50 to 100K ohms
Resistance Tolerance
......................... ±0.1 %, ±0.5 %, ±1 %
Temperature Coefficient
.................±100 ppm/°C, ±50 ppm/°C,
±25 ppm/°C
Temperature Range
................................-55 °C to +125 °C
Insulation Resistance
................ 10,000 megohms minimum
TCR Tracking.........................±5 ppm/°C
Maximum Operating Voltage ...........50 V
Environmental Characteristics
TESTS PER MIL-STD-202 ......
∆R MAX.
Thermal Shock ............................. 0.1 %
Low Temperature Operation ....... 0.25 %
Short Time Overload..................... 0.1 %
Resistance to Soldering Heat ....... 0.1 %
Moisture Resistance ..................... 0.1 %
Mechanical Shock ...................... 0.25 %
Life ................................................ 0.5 %
High Temperature Storage ........... 0.2 %
Low Temperature Storage ............ 0.1 %
Physical Characteristics
Lead Frame Material
.........................Copper, solder coated
Body Material Flammability
......................... Conforms to UL94V-0
Body Material..................Novolac Epoxy
How To Order
PACKAGE
Power Temp. Derating Curve
Package
POWER TEMPERATURE
DERATING CURVE (4100T-1)
3.00
2.75
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0
4108T
25
70
125
150
AMBIENT TEMPERATURE (
ϒ
C )
4120T
4118T
4116T
4114T
Product Dimensions
.635
(.025)
PIN #1 REF.
27.05
MAX.
(1.065)
24.51
MAX.
(.965)
21.97
MAX.
(.865)
19.43
MAX.
(.765)
11.81
(.465)
MAX.
WATTS
.89 ± .25
(.035 ± .010)
TYP.
4.57 + .12/ - .28
(.180 + .005/ - .011)
Package Power Rating at 70 °C
4108T .....................................1.09 watts
4114T......................................2.00 watts
4116T......................................2.25 watts
4118T......................................2.50 watts
4120T .....................................2.80 watts
Typical Part Marking
Represents total content. Layout may
vary.
PART
NUMBER
RESISTANCE
CODE (4 DIGIT)
PIN ONE
INDICATOR
CIRCUIT
4116T-2-
-2203BC
YYWW
2.54 ± .25
(.100 ± .010*)
TYP.
NON-ACCUM.
2.03 ± .12
(.080 ± .005)
1.65 + .12/ - .07
(.065 + .005/ - .003)
.438 ± .050
TYP.
(.019 ± .002)
8.40
MAX.
(.331)
3.43 + .38/ - .25
(.135 + .015/ - .010)
7.87 ± .25
(.310 ± .010)
TO OUTSIDE
WHEN PINS
ARE PARALLEL
.254 ± .050
(.010 ± .002)
8.64 ± .50
(.340 ± .020)
6.71 ± .10
(.264 ± .004)
TC CODE
ABSOLUTE
TOLERANCE CODE
DATE CODE
41 16 T - 2 - 2222 F A B __
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Model
(41 = Molded
DIP)
Number of Pins
Physical Config.
• T = Thin Film
Electrical Configuration
• 2 = Bussed
• 1 = Isolated
Resistance Code
• First 3 digits are significant
• Fourth digit represents the
number of zeros to follow.
Absolute Tolerance Code
• B = ±0.1 %
• F = ±1 %
• D = ±0.5 %
Temperature Coefficient Code
• A = ±100 ppm/°C • C = ±25 ppm/°C
• B = ±50 ppm/°C
Ratio Tolerance (Optional)
• A = ±0.05 % to R1 • B = ±0.1 % to R1
• D = ±0.5 % to R1
Terminations
• L = Tin-plated (RoHS compliant version)
• Blank = Tin/Lead-plated
Consult factory for other available options.
MANUFACTURER'S
TRADEMARK
Isolated Resistors (1 Circuit)
Available in 8, 14, 16, 18,
001 CIRCUIT
Pin
and 20
ISOLATED RESISTORS
001 CIRCUIT
ISOLATED RESISTORS
14
14
88
Bussed Resistors (2 Circuit)
Available in 8, 14, 16, 18, and 20 Pin
002 CIRCUIT
BUSSED RESISTORS
002 CIRCUIT
BUSSED RESISTORS
14
14
88
11
77
11
77
These models incorporate 4, 7, 8, 9, or
10 thin-film resistors of equal value, each
connected between a separate pin.
Power Rating per Resistor......... 0.2 watt
Resistance Range ......50 to 100K ohms
These models incorporate 7, 13, 15, 17,
or 19 thin-film resistors of equal value,
each connected by a common pin.
Power Rating per Resistor....... 0.12 watt
Resistance Range ........50 to 50K ohms
REV. 08/20
WARNING Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth
on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns
®
products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns
®
products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns
®
products.
The characteristics and parameters of a Bourns
®
product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns
®
product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns
®
product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns
®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns
®
product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns
®
product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns
®
product to meet the requirements of such industry standard or particular qualification. Users of
Bourns
®
products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns
®
products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns
®
products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns
®
standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns
®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns
®
standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns
®
standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns
®
standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns
®
custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns
®
custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns
®
standard products shall also apply
to such Bourns
®
custom products.
Users shall not sell, transfer, export or re-export any Bourns
®
products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns
®
products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns
®
products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns
®
products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page:
http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF:
http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
