85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Recently, there have been many rumors about the 2G network being phased out, and various news have been flying around, even becoming a hot search topic. How do we interpret the true meaning of this in...
The strategy of ST chip is ambitious! It not only deepens the cooperation with universities, but also has a wide application in the domestic market! In the last year, the price of an ordinary STM32F10...
[i=s]This post was last edited by bigbat on 2019-2-22 11:52[/i] After lighting up the LED in the previous article, start testing Ethernet. [color=#0000ff]The board is provided by ST, [url=https://www....
This is the 24V input power processing part on a microcontroller circuit board.
What is TV_RM in the red circle? Is it a TVS tube? After being connected in parallel with the resistor, both ends are co...
Background: In order to coordinate the more comprehensive knowledge points of circuit design, I will introduce various commonly used devices and design concepts in circuit design in the near future, s...
Basic knowledge of electronic circuits lecture 424.3.1 In the differential amplifier , is there a problem with Figure 4.3.2?
From the above formula 4.3.2, we can see that R1 and the output voltage are...
The ZigBee module is a module prepared for product development for fast, efficient and stable applications. It hides the external devices that the ZigBee chip must connect to, as well as comp...[Details]
Part 1 Using LabVIEW System VIs
1. Introduction to Serial Port VIs
The serial port communication VIs of LabVIEW are located in the Serial of Instrument I/O Platte, including:
VI Name ...[Details]
e-Network's annual revenue increased by 20.2% year-on-year Shanghai, China, September 19, 2022 – Avnet, the parent company of element14, a global distributor of electronic components and soluti...[Details]
1. The internal temperature sensor of STM32 is connected to channel 16 of ADC and used with ADC to measure temperature. Measurement range –40~125℃, accuracy ± 1.5℃ Operation process: 1), set...[Details]
The ADV601 is a low-cost, single-chip, all-digital, dedicated function CMOS VLSI chip for real-time compression and decompression of digital video signals. It can support compression ratios up to 3...[Details]
In order to meet the functional requirements of each part of the building intercom system, this system uses three I/O port lines and one unlock key.
Among the three I/O lines, one is used as ou...[Details]
Since the general stepper motor and driver housing on the woodworking engraving machine are not magnetically shielded by aluminum, titanium, or magnesium alloy, it interferes with the highly sensitive...[Details]
The waveform of video signals is very complex, and image signals and timing signals are often mixed together. Various signals use different standards and formats, and each has its own characteristi...[Details]
Choose Arteris FlexNoC IP for superior performance, predictable timing closure, and flexibility when deploying on advanced platforms
Ra’anana, Israel and Campbell, Califo...[Details]
In recent years, the emergence of new single-chip microcomputers and the development of integrated circuit technology have provided conditions for updating product design and developing cost-effe...[Details]
1 Introduction The measurement of the DC resistance of the transformer winding is a simple and important test item in the transformer experiment. By measuring the DC resistance of the winding, we can...[Details]
The measuring current part of the clamp is composed of the current measuring part and the current measuring part of the multimeter. The iron core of the transformer has a movable part and is connecte...[Details]
Many oscilloscope users want to quickly transfer waveform data, screenshots, and videos saved by the oscilloscope to their mobile phones. The traditional method is to use a USB flash drive to transfe...[Details]
Radio frequency card (contactless IC card) is a new technology developed in recent years. Compared with traditional contact IC card and magnetic card, the contactless IC card developed by radio fre...[Details]
On November 4, the HuanDa 97.5MW/390MWh shared energy storage power station project started construction in the Beidaqiao new energy planning area of Guazhou County. Image It is understood that this...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
