Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
I have a Texas 14-pin CD4019B chip, but the CD4019B datasheets I searched for are all 16-pin. However, there are two pages of 14-pin in the Texas datasheet package description. I can't tell what funct...
, The AD part of the usage processmainly configures the clock, reference source, sampling channel, sampling mode, storage and sample hold of the ADC12 module.Let's go through it one by one.
The first ...
[i=s]This post was last edited by fish001 on 2019-11-7 22:18[/i]Recently, a junior wanted to save his meal money to buy a genuine Atom STM32 development board to learn RTT. He saved for three days and...
1 Introduction
Heat flow, also known as heat flux density, refers to the amount of heat (vector) transferred per unit area per unit time. Its characterization is the amount of heat transferred, t...[Details]
How to Tune and Antenna Match the MAX1470 Circuit
The MAX1470evkit is tuned and tested at the factory to obtain the highest sensitivity possible. It may however be necessary to "adapt" this...[Details]
This paper mainly discusses the design of loop filters in peripheral circuits for the purpose of chip testing. A simple and easy engineering calculation method and process are given in this paper, and...[Details]
introduction
At present, energy-saving lamps are the most widely used electric light sources. Although electronic energy-saving lamps are no longer at the forefront of lighting technology due t...[Details]
Argonne National Laboratory
The U.S. Department of Energy (DoE) said on Tuesday it plans to provide $120 million (€103 million) over five years to update a DOE Energy Technolog...[Details]
In order to prevent the battery from being overcharged, the charging endpoint needs to be controlled. When the battery is fully charged, there will be some special information available to determine w...[Details]
Flexpoint shock detection sensors are specifically designed to perform shock detection accurately and quickly. Source: Gettyimage/nasakid Flexpoint Sensor Systems has announced in a press rele...[Details]
This paper introduces the design and production of a portable power system with strong versatility and low cost. The system has two power supply modes. It can be powered by an external power supply...[Details]
The headache of electric vehicle batteries For electric bicycles , the development momentum is extremely rapid. In recent years, the actual output has exceeded the social ownership every year, which...[Details]
Memory read operation. For example, if you want to read out the content 50H in memory 40H, the process is as follows:
①The CPU sends the address code 40H to the address bus, and the memory addres...[Details]
ASTM International recently announced its latest personnel appointment. Andrew G. Kireta Jr. will become the new president, succeeding Katharine Morgan, who has served as president of ASTM Internat...[Details]
Recently, the National Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Finance and other four departmen...[Details]
The memory management unit is consumer-oriented and does the following things 1. Application of physical memory 2. Application of virtual memory 3. Mapping of physical memory and virtual memory...[Details]
1. "Three-phase to single-phase", "three-phase to two-phase" and so on
The Russians said that in 1888, Russian Dobrovolsky invented the three-phase system, and the following year he invent...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
