85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
The 5G wireless revolution is bringing big changes to the world of RF design, and the power amplifiers for cell phones and radio base stations are no exception. First, the power amplifier chips in 5G ...
This sharing uses SPI to drive the OLED display. The OLED display controller is SSD1306 , which controls the 128X64 dot matrix display.The structure of SSD1306 is as follows:GPIO can be used to simula...
In a project, the author came into contact with such a communication system. The communication architecture of the entire system is roughly as shown in the figure below, a typical one-master-multiple-...
Power tools have evolved significantly over the past century. Today, they are cordless, lightweight, and battery-powered, making them a great addition to our lives. So what are the factors driving the...
Hello~ Everyone~ Let's chat together~ Recently, I saw several netizens in the forum asking questions about PCB design. Some of them encountered operation problems when using the software, and some sai...
In recent days, teachers and students of Harbin Institute of Technology and Harbin Engineering University have been unable to use MATLAB. Some students of Harbin Institute of Technology said that they...
The existence of obstacles and the presence of obstacles are incomparable in terms of impact. The sudden outbreak of the COVID-19 pandemic in 2020 was like a boulder that suddenly rolled down a long-...[Details]
1 Introduction With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a practical art for architectural decoration. When there are various la...[Details]
Visual navigation is also called image recognition navigation. It is divided into two types: one is wired and the other is wireless. Wireless visual navigation technology uses CCD to capture the cor...[Details]
On May 13, according to foreign media reports, the vigorous development of artificial intelligence, especially generative artificial intelligence, has brought new development opportunities to the c...[Details]
"Charging anxiety" and "range anxiety" are major obstacles to the large-scale industrialization of pure electric vehicles . According to Wuhan Marshal New Energy Charging Station, at the 2019 World ...[Details]
Driven by high-speed digital technology, various complex medical systems are developing rapidly, which has greatly improved the performance, accuracy and efficiency of many services in ...[Details]
Problem: My ARM application does not work. When I run it in a software emulator or JTAG debugger, I notice that the program counter (PC/R15) jumps to the DAbt_Handler label. Q: What does this mean? H...[Details]
On August 1, American technology company Paraclete Energy announced the launch of a new silicon negative electrode material, SILO Silicon™. It is said that the energy density of this polymer-based ...[Details]
The 2440 startup process is a difficult point and not easy to understand. The understanding of the 2440 startup process affects the subsequent analysis of the bare metal code execution process, thus ...[Details]
introduction At present, laser technology is developing day by day and is widely used in basic research, medical treatment, machinery, communication and other fields. Computers are often used for v...[Details]
The National Development and Reform Commission issued the "Notice on Adopting a Supportive Two-Part Electricity Price Policy to Reduce Enterprise Electricity Costs during the Epidemic Prevention an...[Details]
Experienced drivers who often drive in urban areas are familiar with which roads will be congested at what time and which roads are prone to traffic accidents, such as around schools during rush hour...[Details]
The market penetration rate of non-signaling test solutions is rising rapidly. China Mobile plans to launch 5-mode 13-band smartphones to achieve global roaming, which is expected to drive the rapid ...[Details]
Introduction The AIS system is a collision avoidance system that uses TDMA technology to exchange data in the maritime mobile VHF band. It is one of the equipment that every ship must be instal...[Details]
Dazhong.com reporter Zhang Fang, Zhou Chen, Lu Xin intern Dong Jiazhuo reported from Heze that on October 29, the on-site promotion meeting for the construction of Shandong Haichen Integrated Zero Car...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
