85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
The installation and setting steps of the router and computer are as follows: 1. Plug the broadband main network cable into the WAN port of the router, and use a network cable to connect the LAN port...
Recently, there was a report that OPPO is recruiting fresh graduates majoring in chip-related majors with an annual salary of more than 400,000 yuan. This news has once again attracted people's attent...
This article will introduce how to add two GPIO buttons on the Flying OKT507-C development board . I hope it will be helpful to engineers. This article takes the PE5 and PE6 pins as examples. Let's ge...
This review is a bit late. Although it took only two days from the delivery of the board to the receipt, the official Taobao store shipped quickly and the courier was also very good.The packaging is q...
This article briefly describes the advantages of adding peripherals to power management ICs. In general, adding peripherals to power management ICs can improve the integration of hardware and softw...[Details]
Magnetic flap level gauges can be found in many industries such as electricity, petroleum, chemical industry, metallurgy, environmental protection, shipping, food, etc. The reason why this level me...[Details]
According to foreign media GSMArena, Huawei's Finnish representative confirmed that the Huawei P50 series will not only be launched in the Chinese market, but will also be officially launched globall...[Details]
With the rapid development of computers and related microelectronics and optoelectronics technologies, LED displays have become a new type of electronic screen advertising media. Compared with tradit...[Details]
On April 23, realme X50m 5G was officially unveiled. The 6GB+128GB version is priced at 1,999 yuan, and the 8GB+128GB version is priced at 2,299 yuan. The overall performance of realme X50m 5G ...[Details]
Micron Technology Inc. (Nasdaq: MU), a leading provider of memory and storage solutions, today announced that it has begun sampling the industry’s first automotive-grade low-power DDR5 DRAM (LPDDR5) ...[Details]
Automotive chips
have been a hot topic in recent years. With the continuous advancement of the wave of automotive electrification and
intelligence
, many automotive original equipment...[Details]
In WLAN equipment testing, receiver testing is the most time-consuming test item. Not only does it take a certain amount of time to transmit a sufficient number of data packets with statistical sig...[Details]
Recently, there have been reports that some Korean companies, including Samsung and LG, have announced their withdrawal from LCD production. What does this mean for domestic LCDs? In this regard, T...[Details]
The Vectored Interrupt Controller (VIC) has 32 interrupt request inputs that can be programmed into three categories: FIQ, Vectored IRQ, and Non-Vectored IRQ. The programmable allocation mechanism me...[Details]
Entering a new stage of high-quality development, various transformation demands for intelligence, digitalization, green and low-carbon are coming. How to open up the "Ren and Supervision" of enterpr...[Details]
USB3.0 is a dual-bus architecture, which adds a Super Speed bus to USB2.0. The signal rate of the Super Speed bus reaches 5Gbps, uses 8B/10B encoding, works in full-duplex mode, and supports ...[Details]
Atmosic™ Technologies, an innovator in ultra-low power wireless technology for the Internet of Things (IoT), and E Ink, a leader in the development and manufacture of electronic paper, today jointly ...[Details]
At the beginning of 2019, Musk said on his personal social media that Tesla would open all electric vehicle patents without reservation to support the development of the electric vehicle industry. Th...[Details]
In the new energy vehicle market in 2024, although fire accidents have been greatly reduced compared with before thanks to the advancement of power battery safety technology, they still occur from ...[Details]
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
