• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
Since the Hall effect was discovered more than 100 years ago, its application has gone through three stages:
The first stage is from the discovery of the Hall effect to the early 1940s. Initially, due...
Abstract: Remember before 2010, there were still big differences in the models of USB data cables of various mobile phone brands, so the data cables of different mobile phone manufacturers were not un...
The Battleship STM32 development board and four multimeters of the Atom on Time This content is originally created by firstain, a netizen of EEWORLD forum . If you need to reprint or use it for commer...
[i=s]This post was last edited by btty038 on 2019-10-30 15:44[/i]We all know that before GaN, we rarely used negative voltage in RF amplification or [base station amplification], but after GaN came, e...
The program of controlling the mpc014 motion control module through the 51 single-chip microcomputer, the complete circuit diagram and program engineering can be downloaded from the official website h...
This book discusses signal integrity and power integrity issues comprehensively. It mainly covers the overview of signal and power integrity analysis and physical design, the essential meaning of four...
1. Reciprocating motion of the trolley
Use S7-200 to realize the automatic control of the trolley's reciprocating movement. The control process is to press the start button, and the trolley mo...[Details]
According to Taiwan media reports, the total number of TSMC shareholders increased by 2,495 this week to 1,025,640, surpassing China Steel Corporation's 998,980 shareholders to become the top shareho...[Details]
Dust detectors are referred to as dust meters, also called dust measuring instruments or dust testers. They are mainly used to detect the dust concentration in the ambient air. The types of dust mete...[Details]
I recently tested a SD5128 driver and found that it can be implemented using the M0516LAN serial port. I wrote a test program and would like to ask you to check if it is feasible. Thank you.
The...[Details]
When it comes to implementation, software is always the core that stimulates hardware performance. Since the emergence of AI, discussions on the "intelligent transformation" of traditional industrie...[Details]
1. Correct selection of pressure (differential pressure) detection instruments
The correct selection of pressure testing instruments mainly includes determining the type, range, accuracy and ...[Details]
In the past, I had been using the STM32 standard library, and I needed to add the code step by step, set the compilation options, and then compile the entire project. This compilation process is a ve...[Details]
The Federal Aviation Administration (FAA) said in a statement that it was "aware of the recall of batteries used in some Apple MacBook Pro laptops" and said it had notified major U.S. airlines about ...[Details]
After the switch SA1 is switched, the device can automatically control the lighting in corridors and public toilets in public places, so that the lighting is turned off during the day, and the ligh...[Details]
Microcontrollers (MCUs) are generally considered digital devices. By default, their output voltage levels are either high or low, not neutral. To achieve the requirement of LED brightness control, th...[Details]
Recently, the first shared energy storage power station in Xilin Gol League, Xilinhot Taifu Shared Energy Storage Station, completed equipment testing and commissioning. After the project is completed...[Details]
According to the Economic Daily, the financial report released today by optical lens manufacturer Largan Precision shows that the company's revenue in November was NT$5.244 billion (same unit below),...[Details]
Toyota announced that it would invest about $400 million in the Chinese startup Pony.ai. While the entire automotive industry in Europe and the United States is constantly shrinking and adjusting, To...[Details]
On August 26, Strategy Analytics' latest research report pointed out that in Q2 2021, vivo jumped to the top of 5G smartphone shipments in the Asia-Pacific region for the first time. Among the top fi...[Details]
Recently, Wuhan Municipal Bureau of Economics and Information Technology announced the results of the 2024 unicorn enterprise certification. 44 enterprises in the city were selected, of which 31 were ...[Details]
Sensor
京公网安备 11010802033920号
EEWORLD
