M80-4T10405F1-02-322-10-301

The pipeline in ARM is divided into five steps: fetch, decode, execute, simulate save, and write back. SWI (soft interrupt) and UND interrupt both occur in the decoding stage, while the other five in...[Details]

Usually, a digital multimeter can be used to determine whether a power module is good or bad. As shown in the figure below, connect the red probe of the digital multimeter to U/V/W and the black prob...[Details]

A converter is a device that converts one signal into another. A signal is a form or carrier of information. In automated instrumentation and automatic control systems, one signal is often converte...[Details]

As China, South Korea, the United Kingdom, the United States and other countries have launched the commercial use of 5G technology, autonomous driving and intelligent connected vehicles are also like...[Details]

　　The design of LED driver power supply is very important for manufacturers. So, how should we better design LED driver power supply? Let's take a look at the seven LED driver power supply design tip...[Details]

; list  p=16C74, st=off ; PORTC PIN DESCRIPTION ; SCK bit 3, SDI bit 4, SDO bit 5, CS bit 7 ; Fosc = 10.0 MHz, thus each instr. cycle = 400ns ;***************Ram Register Definitions*****************...[Details]

　　 Tesla Inc. (TSLA) said it has only achieved a fraction of its goal to produce 1,500 Model 3s due to production bottlenecks. The luxury electric car maker hopes to break into the mainstream market ...[Details]

        Samsung announced today that the Samsung W21 5G new product launch conference will be held in Nanjing at 17:30 on November 4. The product slogan is still "Caring for the World" and the theme ...[Details]

Tweeter Technology Most of the current speakers are electric speakers, and their upper frequency limit is difficult to reach 20kHz. Let's first look at the force of the electric speake...[Details]

       Sina Digital News, August 17th morning news, last month, Logitech launched the Folio Touch, a $160 keyboard accessory that can be used with the 2018 or 2020 ‌iPad Pro‌. Now someone has written...[Details]

1. Chip part Among them, P1 is the interface reserved for the programmer, and J3 and J4 are reserved for extension modules, such as perpetual calendar, temperature and illumination sensor, voice broa...[Details]

The FLASH memory module of the MSP430 FLASH microcontroller is divided into several segments according to different capacities, among which the information memory SegmengA and SegmentB each have 128 b...[Details]

After the fierce competition in the LCD market, the panel industry has been dominated by Chinese mainland manufacturers since last year, taking more than half of the global market share. Korean and T...[Details]

The factors that affect the effect of the basic measuring instrument are: ①Ambient temperature The instrument should be used strictly in accordance with the working temperature indicated in the per...[Details]

This article discusses the considerations for portable embedded system power supply design and the guidelines that should be followed in the design. These principles are helpful for the p...[Details]