85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
This content is originally created by EEWORLD forum user Silicon Robot . If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source...
Thanks to EE and the manufacturer's trial activities, I got the board for almost half a month, and finally I had some free time to play with the so-called first NXP processor with NPU. The core chip o...
Power amplifiers are usually divided into five categories according to their working status. They are Class A (A), Class B (B), Class AB (AB), and Class D
1. Class A power amplifier:
The output power ...
4. Cost Analysis600)this.width=600" border=0Table 5 Cost analysis table basically meets the design requirements. Compared with the new state and the original state in the above table, the weight, cost...
When I use Device Pack Manager to download, it stops after a while and I have to start over. I am using my mobile phone hotspot to access the internet, and the 4G network is fine for other purposes....
Use NUCLEO-L452 evaluation board I2C1 to read LP22HH data and output it to computer display via UART2
STM32CubeMX builds the project, STMems StandardC official driverProject Files...
The SDA and CLK of the I^2C bus are both wired-and relationships. In order to avoid confusion, the I^2C bus must use bus arbitration to determine which host controls the validity of the data bi...[Details]
According to LetsGoDigital, American computer manufacturer IBM is applying for a patent for an electronic device with a flexible display. According to reports, this special device can use the appropr...[Details]
According to the Economic Daily, the financial report released today by optical lens manufacturer Largan Precision shows that the company's revenue in November was NT$5.244 billion (same unit below),...[Details]
NXP launches new secure wireless MCU, further expanding its broad Matter portfolio RW612 is NXP’s first secure tri-band radio MCU, integrating i.MX RT cross-border MCU and supporting MatterTM sta...[Details]
The rapid development of 3G networks has stimulated the demand for large-scale services such as various groups, WLAN (wireless local area network), and community data services, and has put forward hig...[Details]
1 Introduction
Lithium-ion batteries are widely used in GSM/CDMA and high-end portable products (such as digital cameras, camcorders, etc.) due to their advantages of small size, light...[Details]
The COD, ammonia nitrogen and total phosphorus three-in-one online analyzer is a new generation of online analyzers that fully complies with standards and industry standards. One instrument can sim...[Details]
Huawei pushed the EMUI 11.0.0.150 SP3 update for the Mate 40 series yesterday. The official said that it fixed the abnormal display of lock screen notifications in some scenarios and optimized ...[Details]
USI and China Science and Technology have reached a strategic cooperation agreement to provide first-class systems and one-stop service solutions to the automotive powertrain market. This cooperati...[Details]
0 Introduction
In order to better cultivate innovative talents, domestic universities have strengthened the teaching of practical links. Through the investigation of practical teaching in science an...[Details]
Power transformers play an important role in power plants. However, due to their structure, process, operation and maintenance, transformer failures frequently occur in power plants, greatly affecting...[Details]
China Energy Storage Network:
Smog often covers the capital. To combat smog in Beijing, we need to find a breakthrough by developing a new model of energy internet. Smog control will be a...[Details]
The analog monitoring system is an analog series with video matrix, splitter, and recorder as the core, supplemented by other sensors.
The traditional analog closed-circuit television monitori...[Details]
At present, the main problems of power quality are as follows: harmonic distortion, power outage, over (under) voltage, voltage sag, transient, surge, etc. The reasons for these problems come from in...[Details]
Temperature control probe sensors are devices used to measure temperature and are widely used in industry, medical treatment, scientific research and other fields. Among temperature control probe s...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
